B e o l i n k v i d e o.
B e f o r e y o u s t a r t … beolink system the beolink distribution system enables you to control any source in your main system and to see and hear it in the link room. Of course, you can still use your extra tv quite inde- pendently of the tv in your main system. Your link room must be con- nect...
The main room is the room in which you have placed your audio system and/or video sys- tem (the main system). The link room is where you place your extra tv (connected to the main system through the beolink installation). Note: building and electrical codes vary from locality to locality. Make sure ...
4 beolink connection to the main system audio aux link connection to the extra tv c o n n e c t i o n s connect your beolink video box as follows: in the link room: using a beo- link cable, connect the flat multi-pin plug to the socket marked master link on the beolink video box, and run the cable t...
5 beolink junction box main system link system (extra tv) aerial connection beolink video box connection to the mains to ensure correct function of your setup, it is essential that you connect both the main system and your extra tv to the mains – before connecting the beolink video box to the mains!...
6 r e a d y f o r u s e … beovision model: programming sequence: mx 7000/6000/4000 (beo4) hold the • button while pressing list. When the beo4 display reads option?, press go. Press list to display v.Opt and then select 2 mx 7000/6000/5500/4000/3500 while the tv is in stand-by mode, and press pictur...
7 beovision mx 7000/6000/4000 labelled beo4 on the rear cover and no second video tape recorder in the main system beovison mx as mentioned above and a second video tape recorder in the main system beovision mx 7000/6000/4000 not labelled beo4 on the rear cover or lx 6000/5500/5000 beovision mx 5500...
3500xxx 0986 printed in denmark by bogtrykkergården a-s, struer.
