Bang & Olufsen BeoSound 1 Manual - page 12
12
You can make BeoSound 1 wake you
up in the morning.
The Wake-up Timer is a once-only
Timer. Like an alarm clock it is
deleted once it has been executed.
While the Timer is executed, the time
is shown in the display, when you
operate or switch off your
BeoSound 1, the display returns to
the mode you have chosen.
Once you have made one Wake-up
Timer, BeoSound 1 automatically
suggests the time you entered for
the latest Wake-up Timer in the
display when you enter a new one.
Wake-up Timers can of course also
be deleted again.
Wake-up Timer
Enter a Wake-up Timer
When you choose radio as your source, the
radio will start playing on the station you last
listened to. If you choose CD as your source,
make sure that a CD is loaded. If you do not
choose a source, the radio will be used for
your Wake-up Timer.
While BeoSound 1 is in standby,
press and hold
ss
or
tt
until the
time for the latest Wake-up
Timer is shown in the display,
the digits are blinking
Press
ss
or
tt
to find the time
you want the BeoSound 1 to
start playing. Holding down
ss
or
tt
will accelerate the change
in numbers
Press the button of the source
you want to use for your
Wake-up Timer; RADIO or CD.
Pr or Cd is shown in the display
Press STORE to store the time
you want. The time for the
Wake-up Timer is briefly shown
in the display
ss
tt
6.25
ss
tt
7.10
RADIO
Pr
STORE
7.10
Using Beo4
You can also use the Beo4 remote control to
enter a Wake-up Timer.
While BeoSound 1 is in standby,
press the MENU button on
Beo4. The time for the latest
Wake-up Timer is shown in the
display, the digits are blinking
Key in the time you want
BeoSound 1 to start playing
Press the button of the source
you want to use for your
Wake-up Timer, RADIO or CD.
Pr or Cd is shown in the display
Press GO to store your Wake-up
Timer. The Wake-up time is
shown briefly in the display
MENU
6.25
1 – 9
7.10
RADIO
Pr
GO
7.10
NOTE! If the clock has not been set, or
BeoSound 1 has been disconnected from the
mains for approx. 30 minutes, it is not possible to
set a Wake-up Timer. The clock must be set first,
refer to the previous page.