Bang & Olufsen BeoVision Avant Setup Manual - page 13
13
Extend your system into a fully
equipped Home Theatre system by
connecting four Bang & Olufsen
loudspeakers and a BeoLab 2
subwoofer*.
When you switch on one of your
sources in your BeoVision Avant, the
speakers which you may have in a
surround sound system can be cut in
or out, depending on what kind of
sound you prefer for the source you
are using.
BeoVision Avant may switch on a
speaker combination automatically.
This happens if e.g. a broadcasted
program or DVD contains
information about the number of
speakers to be switched on. You are
still free to choose the speaker setup
you prefer.
*NOTE! Refer to Loudspeaker connections –
surround sound on page 9 in the Reference book
for more information about how to connect
loudspeakers to BeoVision Avant.
Home Theatre viewing with BeoVision Avant
Select speakers for movie sound
While you are watching a movie or program,
you can choose the speaker combination you
wish to switch on, provided that the various
sound modes are available in your system.
Press LIST until SPEAKER is
shown in the Beo4 display
Press the number of the speaker
option you want. The speakers
selected will cut in automatically
If you want to adjust the sound
balance for the program you
are watching, press
▲
or
▼
to
adjust the balance between the
external front and rear speakers,
and press
ss
or
tt
to adjust the
balance between the left and
right speakers
Press EXIT to remove SPEAKER
from the Beo4 display and to
return to the source you were
using
LIST
SPEAKER
1 – 5
▲
▼
ss tt
EXIT
Speaker combinations
SPEAKER 1
Stereo sound in BeoVision Avant speakers only.
For programs with dialogue, e.g. TV news.
SPEAKER 2
Stereo sound in the two external front speakers.
For music CDs.
SPEAKER 3
BeoVision Avant speakers and external front
speakers are active. For TV programs in stereo.
SPEAKER 4
Enhanced stereo sound in the external front and
rear speakers. For music CDs or tapes.
SPEAKER 5
Surround sound from all speakers. For programs
in Dolby Surround Sound.
If you have connected only two external front
speakers to BeoVision Avant, you will only be able
to choose SPEAKER 1–3.