Bang & Olufsen BeoVision Avant Setup Manual - page 14
14
Make the picture fill out the screen
BeoVision Avant always ensures you the best
possible picture. It automatically adapts the
picture so that it fills out as much of the
screen as possible. However, you can still
choose a preferred format for Home Theatre
viewing.
Press LIST on Beo4 until FORMAT
is shown
Press if you want BeoVision
Avant to optimise the picture,
otherwise…
…press the number of the
desired picture format
If you have chosen Format 1,
press
▲
or
▼
to select variations
of this format
If you have chosen Format 2,
press
▲
or
▼
to move the
picture up and down
Press to leave the FORMAT
function
LIST
FORMAT
GO
1 – 3
▲
▼
▲
▼
EXIT
To choose a format...
Picture formats to choose from
FORMAT 1
For standard TV pictures, as shown to the right.
Three variations are available: 15:9 (for the
largest picture), 14:9 and 4:3 (for standard
picture format).
FORMAT 2
For letter-box pictures.
FORMAT 3
For 16:9 wide-screen pictures. FORMAT 3 will
usually be selected automatically. If this is not
the case, you can select it yourself.
The illustration at the top shows the BeoVision
Avant standard picture format, which is a 15:9
format. The overlapping illustrations above
show what happens to a letter-box picture
when you choose format 2. The picture is
adapted to fill out more of the screen.
3508468
0109
Printed in Denmark by Bogtrykkergården a-s, Struer
>> Home Theatre viewing with BeoVision Avant