Bar Aid Baraid 400-10A Installation And Operation Instructions Manual - Baraid
IO-0000000125-002-EN / 14. Nov. 2013
27
Installation and Operation Instructions
BaraiD
EN
Problems and malfunctions
9.1 remedying the problem
9.1.1 Poor wash result
Nature of the problem Possible cause
remedy
Washware not clean.
Wash arms stiff (you should be able to turn
them easily by hand).
Remove wash arms and clean them thor-
oughly.
Also check water outlet from machine to
wash arms is clear.
Wash arm nozzles are clogged (visual
check).
Remove wash arms, remove cleaning
caps and rinse wash arms thoroughly until
all contamination is removed.
Replace cleaning caps.
Rinse nozzles clogged (usually by lime
deposit).
Remove rinse arms and decalcify them in
separate container.
Check site softener system for function.
Regeneration concentration is too low or
too high.
Check detergent concentration setting.
Coarse strainer clogged.
Remove, empty and clean strainer.
Wrong program selected for heavily soiled
washware.
Select program with longer wash cycle.
Washware dries poorly. Rinse aid dosing too low.
Increase concentration (see operating
instructions).
Washware still greasy.
Detergent concentration too low: increase
(see operating instructions).
Check if detergent is appropriate. If not,
choose a stronger one.
Draincontaminatedwaterandrefillma-
chine. Clear washware more thoroughly
beforehand.
Rack is not suitable for type of dishes
(sloping).
Use appropriate racks to create a sloping
position which allows water to drain away
from cavities.
Washware remains in the machine too
long at the end of rinse cycle.
Remove washware as soon as cycle is
completed to enable it to dry.
9