Bar Aid Baraid 400-10A Installation And Operation Instructions Manual - Baraid
IO-0000000125-002-EN / 14. Nov. 2013
9
Installation and Operation Instructions
BaraiD
EN
safety instructions and regulations
► Havethemachineconnectedtothepowersupplybyqualified
personnel.
► Haveadditionalfeedtanksmountedbyqualifiedpersonnel.
Avoid fire risk:
► Donotallowwatertoflowunderlivecomponents.
– Make sure the machine is correctly stored (see frost damage
section
2.3
).
– Makesurethatthemachinedoesnotoverflowwhenbeing
filled.
► Havethemachineconnectedtothepowersupplybyqualified
personnel.
► Haveallmodificationstothemachinecarriedoutbyqualified
personnel.
Avoid chemical burns, sensitisation of the skin, poisoning:
► Wear protective equipment (gloves, safety goggles, protective
clothing) when handling chemicals.
► Use only suitable chemicals. Observe the manufacturer’s data.
► Have chemical sensor system set by authorised trained service
technicians.
► Do not open the door during operation, wait for the program to
finish.
► Disconnect the machine from the mains prior to cleaning.
► For cleaning, wear protective equipment (gloves, safety gog-
gles, protective clothing) when touching parts contaminated by
detergent.
Avoid burns, scolds (to the hands):
► Do not open the door during operation or the evaporation
phase,waitfortheprogramtofinish.
► Disconnect the machine from the mains prior to cleaning.
► For cleaning, wear protective equipment (gloves, safety gog-
gles, protective clothing) when touching parts contaminated by
detergent.
Avoid slipping:
9
Moisturecanbuilduponthemachinefloor.
► Provideafloorcoveringthatisguaranteedtobenon-slipin
case of moisture.
Residues on the washware, hygiene regulations not main-
tained.
► Hygiene regulations must be maintained and/or demonstrated
in accordance with the national provisions.
2.2.4 additional hazards
Potential hazards caused by operating resources to be used can
be found in the enclosed safety datasheets. Workplaces must be