1. DL manuals
  2. Barco
  3. Projector
  4. DATA 708HS R9002230
  5. Owner's Manual

Barco DATA 708HS R9002230 Owner's Manual

Summary of DATA 708HS R9002230

  • Page 1

    R9002230 r9002239 owner's manual data 708hs.

  • Page 2

    Barco nv/projection systems noordlaan 5 b-8520 kuurne belgium tel: +32/56/368211 fax: +32/56/351651 e-mail: sales.Bps@barco.Com visit barco at the web: http://www.Barco.Com printed in belgium due to constant research, the information in this manual is subject to change without notice. Produced by ba...

  • Page 3

    Barco projection systems r9002230 r9002239 data 708hs date : 260299 art. No. : r5975589 owner's manual rev. : 01.

  • Page 4

    I-2 5975589 barcodata 708 hs 080998 table of contents i safety instructions ..................................... 1-1 on safety .......................................................................... 1-1 on installation ................................................................. 1-2 on serv...

  • Page 5

    1-1 safety instructions 5975589 barcodata 708 hs 260299 1 warning to prevent fire or electrical shock hazard, do not expose this equipment to rain or moisture federal communication commission (fcc statement) this equipment has been tested and found to comply with the limits of a class a digital devi...

  • Page 6

    1-2 safety instructions 5975589 barcodata 708 hs 260299 a. Mains lead (power cord) with cee 7 plug: the wires of the mains lead are colored in accordance with the following code. Green and yellow: earth (safety earth) blue: neutral brown: line (live) b. Power cord with ansi 73.11 plug: the wires of ...

  • Page 7

    1-3 safety instructions 5975589 barcodata 708 hs 260299 on cleaning unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. - to keep the cabinet looking brand-new, periodically clean it with a soft cloth. Stubborn stai...

  • Page 8

    1-4 safety instructions 5975589 barcodata 708 hs 260299.

  • Page 9

    2-1 location and function of controls 5975589 barcodata 708 hs 080998 2 3 4 2 1 5 7 6 8 9 10 11 32:( 50$,1 6 see installation in- structions before connecting to the supply. Voir la notice d’instal- lation avant de raccorder au réseau. Vnom 120/230v imax 5/2,5 amp freq 60/50 hz off on -c o n v -17v ...

  • Page 10

    2-2 location and function of controls 5975589 barcodata 708 hs 080998 rcu control panel terminology 1 2 3 4 5 6 7 9 8 10 11 12 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 (17(5 32c 3$86( 7(;7 (;,7 $'- 67% 6+$531(66 7,17 &2/25 %5,*+71(66 &2175$67 this remote control includes a battery powered infrared (i...

  • Page 11

    3-1 connections 5975589 barcodata 708 hs 080998 3 -9v sf hold down eht standby -conv -17v +17v +hthd +conv +9v +210v +30v 123 123 123 coinc hold down hd 32:(50$,16 see installation in- structions before connecting to the supply. Voir la notice d’inst al- lation avant de raccorde r au ré seau. Vnom 1...

  • Page 12

    3-2 connections 5975589 barcodata 708 hs 080998 source no projector input press digit button 1 comp. Video 1 2 s-video*/comp. Video 1 2 3 rgbs or rgsb** 3 3 rgb3s or rg3sb*** 4 3 (r-y)y(b-y)s or (r-y)ys(b-y)**** 5 3 (r-y)y(b-y)3s or (r-y)y3s(b-y)***** 6 32:(50$,16 see installat ion in- st ruct ions ...

  • Page 13

    3-3 connections 5975589 barcodata 708 hs 080998 select with or then to return. 32:(50$,16 see installation in- stru ct ions before connecting to the supply. Voir la notice d’instal- lation avant de racco rder au résea u. Vno m 12 0/2 30v ima x 5 /2,5 amp freq 60/50 hz off on -c o n v -17v st an d b ...

  • Page 14

    3-4 connections 5975589 barcodata 708 hs 080998 32:(50 $,16 see installatio n in- st ructio ns before co nnecting to the su pply. Voir la notice d’instal- lation a vant de racco rder au ré sea u. Vnom 120/230v imax 5/2,5 amp freq 60/50 hz off on -c o n v -17v st an d b y h o l d d o wn e h t sf h o ...

  • Page 15

    3-5 connections 5975589 barcodata 708 hs 080998 32:(50 $,16 see installatio n in- stru ctions before connecting to the supply. Voir la notice d’instal- lation avant de raccorde r au réseau. Vnom 120/230v i max 5/2,5 amp freq 60/ 50 hz off on -c o n v -17v st an d b y ho l d do w n e h t sf ho l d do...

  • Page 16

    3-6 connections 5975589 barcodata 708 hs 080998.

  • Page 17

    4-1 controlling 5975589 barcodata 708 hs 080998 310a.Drw 4 fig.1 fig.2 controlling battery installation in the rcu. A new battery is delivered inside the plastic bag with the power cord. Before using the rcu, install first the battery. Remove the battery cover on the backside of the remote control b...

  • Page 18

    4-2 controlling 5975589 barcodata 708 hs 080998 screen ir sensor table addr adj exit stby m ute text brigh tness - + - + - + - + sh arp ne s s - + ti nt col or co ntrast free z 0 9 7 8 6 5 4 3 2 1 ente r addr adj exit stby m ute text b r i gh tn ess - + - + - + - + s ha rp ne s s - + tint col or co ...

  • Page 19

    4-3 controlling 5975589 barcodata 708 hs 080998 to continue using the rcu, it is necessary to enter an address with the digit buttons (address between 0 and 9). For example : if the address key displays projector address 003, the press "3" digit button on the rcu to set the rcu's address to match th...

  • Page 20

    4-4 controlling 5975589 barcodata 708 hs 080998 brightness control a correct 'brightness' setting is important for good image reproduction. Adjust the brightness with the + button and - button until the darkest parts of the picture appear black. A bar scale gives a visual indication on the screen of...

  • Page 21

    5-1 start up of the adjustment mode 5975589 barcodata 708 hs 080998 5 start up of the adjustment mode adjustment mode all picture geometry and convergence adjustments are made while in the 'adjustment mode'. To enter the adjustment mode : adjustment mode select a path from below: iris guided random ...

  • Page 22

    5-2 start up of the adjustment mode 5975589 barcodata 708 hs 080998 some items in the adjustment mode are password protected. While selecting such an item, the projector asks you to enter your password. (password protection is only available when the password dip switch on the controller module is i...

  • Page 23

    6-1 random access adjustment mode 5975589 barcodata 708 hs 080998 6 green horizontal red vertical blue vertical green vertical left bow left keystone random access adjustment mode starting up the random access adjustment mode. Push the control disk up or down to highlight "random ac- cess" and then ...

  • Page 24

    6-2 random access adjustment mode 5975589 barcodata 708 hs 080998 top-bottom (n-s) h centerline bow top bow h centerline skew bottom bow top keystone bottom keystone seagull correction h&v size blanking convergence color select v linearity bottom top left right coarse adjustment red on green blue on...

  • Page 25

    6-3 random access adjustment mode 5975589 barcodata 708 hs 080998 selecting setup pattern if an external source is connected to the projector, this menu will be displayed. Push the control disk up or down to highlight the desired setup pattern and then press enter. Genlocked pattern : internally gen...

  • Page 26

    6-4 random access adjustment mode 5975589 barcodata 708 hs 080998 select with ê or é then to return. Random access adjustment mode picture tuning geometry convergence color select contrast modulation select with ê or é to accept to return. Picture tuning color balance sync : fast peaking : on line d...

  • Page 27

    6-5 random access adjustment mode 5975589 barcodata 708 hs 080998 line doubler (option) line doubling is only possible for video, s-video, component video images on standard line frequency and rgb signals on 15 khz. To eliminate the video line patterns and to improve the image stability, the line do...

  • Page 28

    6-6 random access adjustment mode 5975589 barcodata 708 hs 080998 h phase > 70 h phase > 70 random access adjustment mode picture tuning geometry convergence color select contrast modulation geometry adjustments the geometry adjustments have to be done only on the green image. These adjustments are ...

  • Page 29

    6-7 random access adjustment mode 5975589 barcodata 708 hs 080998 correct raster position wrong raster position forbidden area projected raster crt faceplate border phosphor border raster shift adjustment the green raster must be centered both horizontally and vertically on the center of the crt sur...

  • Page 30

    6-8 random access adjustment mode 5975589 barcodata 708 hs 080998 select with ê or é then to return. Left-right (e-w) v centerline bow v centerline skew right bow right keystone left bow left keystone seagull correction left-right (east-west) adjustments left-right and center adjustments affect only...

  • Page 31

    6-9 random access adjustment mode 5975589 barcodata 708 hs 080998 top-bottom top-bottom (north-south) adjustments top-bottom and center adjustments affect only the horizontal lines of the projected image. To start up the top-bottom and center corrections, follow the next procedure : push the control...

  • Page 32

    6-10 random access adjustment mode 5975589 barcodata 708 hs 080998 h size 70 70 image too tall image too short ideal image hight ideal image hight h&v size adjustment push the control disk up or down to highlight h&v size on the geometry menu and then press enter. Enter will select size adjustment. ...

  • Page 33

    6-11 random access adjustment mode 5975589 barcodata 708 hs 080998 bottom blanking top blanking right blanking left blanking blanking adjustments blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and to hide or black out unwa...

  • Page 34

    6-12 random access adjustment mode 5975589 barcodata 708 hs 080998 25 23 9 15 17 24 22 8 14 16 5 4 1 2 3 20 18 6 10 12 21 19 7 11 13 select with ê or é then to return. Convergence select with ê or é then to return. Horizontal sides vertical corners coarse adjustment coarse adjustment red on green bl...

  • Page 35

    6-13 random access adjustment mode 5975589 barcodata 708 hs 080998 70 red image green image fine convergence adjustment use the control disk to move the box to the desired zone and then press enter to begin the convergence adjustment. Start the convergence adjustment with zone one and continue as me...

  • Page 36

    6-14 random access adjustment mode 5975589 barcodata 708 hs 080998 contrast modulation highlight contrast modulation with the arrow keys and press "enter" to select. "enter" selects the contrast modulation menu. "exit" returns to the path selection menu. "adjust" returns to operational mode. The fir...

  • Page 37

    6-15 random access adjustment mode 5975589 barcodata 708 hs 080998 contrast edge correction ('hot spot') highlight left-right with the arrow keys and press "enter" to start the horizontal 'hot spot' correction in the center of the screen. Adjust with the arrow keys for the same light output in the c...

  • Page 38

    6-16 random access adjustment mode 5975589 barcodata 708 hs 080998.

  • Page 39

    7-1 service mode 5975589 barcodata 708 hs 080998 7 service mode starting up the service mode. Use the control disk to highlight 'service' and then press enter. Some items in the service mode are password protected (when the password function is active). Enter your password to continue. All other pas...

  • Page 40

    7-2 service mode 5975589 barcodata 708 hs 080998 projector setup highlight 'projector set-up' by pushing the control disk up or down and press enter to display the projector setup menu. Within the projector setup menu, the fol- lowing items can be consulted or set to the desired setting : - identifi...

  • Page 41

    7-3 service mode 5975589 barcodata 708 hs 080998 total run time highlight 'total run time' with the control disk and press enter to display the amount of time the projector has played since its first start up at the factory. Note : all projectors leave the factory after a burn-in period of approxima...

  • Page 42

    7-4 service mode 5975589 barcodata 708 hs 080998 change projector address every projector requires an individual address between 0 and 255. This address can be software installed. To change that address, push the control disk up or down to highlight 'change projector address' and press enter. The ch...

  • Page 43

    7-5 service mode 5975589 barcodata 708 hs 080998 select with or then to return. Barco_logo the barco logo can be added to the image, in overlay or in background, on any place on the screen. To add the barco logo or to change a setting in the barco logo menu, highlight 'barco logo' by pushing the con...

  • Page 44

    7-6 service mode 5975589 barcodata 708 hs 080998 copy a block the copy a block function copies the settings of a selected block into the active block. Highlight copy a block with the control disk and press enter. Enter will select the highlighted item. Exit returns to the path selection main menu. A...

  • Page 45

    7-7 service mode 5975589 barcodata 708 hs 080998 deletion of all blocks highlight 'delete all blocks' with the control disk and press enter. Enter gives a confirmation message before deleting. Exit returns to the path selection main menu. If you are certain you wish to delete all blocks, press enter...

  • Page 46

    7-8 service mode 5975589 barcodata 708 hs 080998 r & b convergence mid item is password protected. Highlight 'r & b convergence mid' with the control disk and press enter to set all convergence settings to their midposition. A confirmation screen will be displayed first. Memory management copy a blo...

  • Page 47

    7-9 service mode 5975589 barcodata 708 hs 080998 common settings highlight 'common settings' by pushing the control disk up or down and press enter to display the common settings menu. Within the common settings menu, the following items can be set up or executed : - g2 adjustment - crt run in cycle...

  • Page 48

    7-10 service mode 5975589 barcodata 708 hs 080998 if a memory block adjusted on an internal # pattern is available, the crt run in cycle will start when pressing enter. If no such a block is available, the projector cannot run the crt run in option and leaves the adjustment mode. If you still want t...

  • Page 49

    7-11 service mode 5975589 barcodata 708 hs 080998 a warning, permanent boost mode in use, will be displayed to inform the user. When text is on, this warning will be repeated every time a new source is selected. Memory banks the user has the possibility to create 8 different memory banks for each so...

  • Page 50

    7-12 service mode 5975589 barcodata 708 hs 080998.

  • Page 51

    8-1 messages, warnings and failures 5975589 barcodata 708 hs 080998 8 messages, warnings and failures when selecting a new source, information about this source will be displayed on the screen. Source number, horizontal and vertical fre- quencies of the displayed source. Source 01 announcement of th...

  • Page 52

    8-2 messages, warnings and failures 5975589 barcodata 708 hs 080998 failure rcvds com- munication error serial communication error be- tween the rcvds and the projec- tor. Failure iris commu- nication error wait starting up iris message during the start up of the iris. Message will disappear when th...

  • Page 53

    9-1 options 5975589 barcodata 708 hs 080998 9 ir receiver 800 this infrared receiver unit makes it possible to control the projector from another room. There is a communication line with cable between the ir receiver and the projector or the rcvds05. The control information from the rcu can now be s...

  • Page 54

    9-2 options 5975589 barcodata 708 hs 080998 multi-functional analog graphics interface kit. Barco's magik interface allows the user to connect a presentation device such as a projector or a professional monitor to any computer with analog video signal with or without maintaining the connection with ...

  • Page 55

    A-1 adjustment blocks and source numbers 90-99 5975589 barcodata 708 hs 080998 a ○○○ adjustment blocks (memory blocks) as the projector is digitally controlled, all geometry and convergence adjustments are stored in the projector’s memory as numeric values. These numeric values are used to control d...

  • Page 56

    A-2 adjustment blocks and source numbers 90-99 5975589 barcodata 708 hs 080998.

  • Page 57

    B-1 configuration with crt's rotated clockwise through 90° 5975589 barcodata 708 hs 080998 b barco screen table screen ir sensor table barco screen ir sensor table barco configuration with crt's rotated clockwise through 90° with a normal device, the following configuration: results in this projecte...

  • Page 58

    B-2 configuration with crt's rotated clockwise through 90° 5975589 barcodata 708 hs 080998 influence on the way to do geometry adjustments. In both configurations the following rules apply: - when a certain adjustment allows only horizontal or only vertical changes then é and è on the control disc p...

  • Page 59

    I-1 insert card 5975589 barcodata 708 hs 011098 " 3 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6 5&8 ,13876285&(6 352-(&725 5&9'6 ,13876285&(6 insert card.