Barco RHDM-2301 Brochure & Specs - page 7
Technical specifications
Track ball for on-screen display, panning &
zooming, and split screen functionality
Front sensor for real-time corrections
(RHDM-2301 only)
RHDM-2301 display:
•
Active area RHDM-2301: 22.5’’ (57 cm)
•
Resolution RHDM-2301: 1920x1200
•
Contrast RHDM-2301: typical 800:1
•
Panel drive: 96-120Hz, 10 bit native,
22 bit dithered
RHDM-1701 display:
•
Active area RHDM-1701: 16.53’’ (42 cm)
•
Resolution RHDM-1701: 1920x1080
•
Contrast RHDM-1701: typical 1000:1
•
Panel drive: 96-120Hz, 10 bit native,
22 bit dithered
Optical:
•
Wide gamut RGB-LED backlight
•
Selectable white points: D55 – D65 –
D75 - D93 [default: D65]
•
Selectable gamma 1.0 - 3.0
[default: 2.35 –EBU/SMPTE compliant]
•
RHDM-P series also allows selecting
custom R, G and B primaries.
Calibration and stability:
•
Compliant with EBU, SMPTEC and ITU
BT.709 primaries
•
Deep level, 3D-LUT factory calibration
•
Thermal sensor circuit for LED stabi-
lization with temperature
•
Embedded spectrometer for overall
color stabilization over time
•
Embedded special sensors for LED uni-
formity and color stability over time
•
Front sensor for real-time corrections
(RHDM-2301 only)
Processing:
•
48 bit color processing (16 bit per
color)
•
96-120 Hz native LCD driving (prevents
motion judder, genlocks to all inputs)
•
Genlock and frame sync
•
Slow or fast sync selection
•
Color-stabilized scanning LED back-
lights for motion blur prevention
•
Motion adaptive de-interlacing
•
Interlaced driving (black-line insertion)
for CRT-like motion quality
•
Quantified latency
(depending on scanning mode)
Connectivity:
•
Modular input configuration: 4 slots
•
Standard delivered with 1 SDI module
•
Space for additional:
- 1 x SDI module
- 2 x DVI input modules
SDI module:
•
Input/output card supporting 2x SD-
SDI or 2x HD-SDI
•
3Gb/s and Dual Link inputs are stan-
dard on RHDM-P series and optional
on RHDM-B series.
Supported signal standards:
•
SD-SDI 576i/480i (ITU-R BT.601)
•
HD-SDI 1080p/pSf at 30, 29.97, 25, 24
and 23.98 frame rate (SMPTE 274M)
•
HD-SDI 1080i at 60, 59.94 and 50 Hz
field rate (SMPTE 274M)
•
HD-SDI 720p at 60, 59.94, 50, 30, 29.97,
25, 24 and 23.98 frame rate (SMPTE
296M)
•
3Gb/s and Dual Link HD-SDI (SMPTE
372M, 425M) are standard on RHDM-P
and optional on RHDM-B
Functions:
•
Safe area and aspect ratio markers
•
User selection of working color space
(color temperature, gamma, gamut)
•
R-G-B-monochrome channel selection
•
Extended aspect ratio and scaling fac-
tor selection
•
Split-screen mode with zooming and
panning per displayed input (for mul-
tiple camera color correction)
•
In-Monitor-Display (IMD) and 2 in-
monitor tally lights controlled
remotely (TSL v.3.1 and 4.0)
Control:
•
Detachable front control panel with
main functions (RHDM-2301 only)
•
Ethernet interface with web server
and TCP/IP interface
•
RS485 serial IMD and tally control
•
RS485 parallel GPIO for tally control
•
USB: for firmware and license upload
via mass-storage devices
Power & environmental:
•
Power consumption: nominal 150W
•
Input voltage: 85-264 VAC, 47-63 Hz
•
Operating temperature: 10-40 °C
(50-104 °F)
•
Dust class: 8 according to ISO14644-1
(in operation).
Easy integration:
Barco’s RHDM series displays are opti-
mized for easy integration into TV
studios and OB vans. Thanks to a well-
studied mechanical connection system,
the display can be easily built into racks
with easy access to the input connec-
tors. The display’s reduced width and
depth also make it an ideal solution for
environments where space is limited.
BCD_bro_RHDM_series:- 22-03-2010 10:56 Page 7