BARO BR-300A User Manual - Handling Precautions:
3
www.barosnt.com
Handling Precautions:
Do not remove the product
casing. The product’s
components can deliver fatal
electrical shock.
Do not put metallic objects
into the product. This can
result in product damage and
severe electrical shock.
Do not touch the device with
wet hands or if the device has
been in contact with water.
This can result in severe
electrical shock.
Do not pull the cord when
unplugging the product. Grab
the plug only. Ensure the cord
is not tangled.
If the product emits a burning
scent, unplug it immediately
from its power source and
contact a service
representative.
Clean only with a dry cloth.
Do not use liquids such as
gasoline or benzene when
cleaning. This may result in
fire.
Installation Precautions:
When not in use turn the
product off and disconnect it
from its power source.
Ensure the product operates
at the correct voltage.
AC: 220V/60Hz
DC: 24V
Do not install the product in
direct sunlight. This can lead
to the product overheating
and may result in product
damage or fire.
Do not install the product
near heating appliances.
Do not install the product in
dusty or humid environments.
This can lead to premature
product failure.
Do not install the product in a
location where it will be
subject to vibrations. This can
lead to premature product
failure.
Do not install the product
where it will be subjected to
extreme hot or cold
temperatures.
Do not block the product’s
ventilations holes or install in
a poorly ventilated space.
This may lead to product
overheating.