BARO BR-300A User Manual - Warning
5
www.barosnt.com
•
If smoke or strange sounds are emitted from the product, immediately turn off the
power switch and disconnect the system from its power source and other devices.
Issues such as these could result in fire or electrical shock. After disconnecting the
product from its power source, ensure there is no fire and contact your product
representative or service centre immediately.
•
If water or any other liquid enters the product, immediately turn off the power switch
and disconnect it from its power source and other devices. After disconnecting the
product, contact your product representative or service or service centre
immediately. Doing otherwise could result in fire or electrical shock.
•
If the product is dropped or the product housing is broken, turn of the power switch
and disconnect the product from its power source and other devices. After
disconnecting the product, contact your product representative or service or
service centre immediately. Doing otherwise could result in fire or electrical shock.
•
Use only the specified power input (DC: 220V, 60Hz). Using a voltage other than
the one specified may result in product failure or electrical shock.
•
Ensure that water does not enter this product. This will create a risk of electrical
shock. Do not use in extremely humid environments. If using outdoors, avoid use
during rainy weather, near bodies of water, or water sources of any kind.
•
Ensure that metals and flammable materials are not inserted into the product’s
interior or ports. Take extra precautions that children also avoid these actions.
•
This device may be connected by its AC OUTLET. The power consumption of the
connected equipment should not be more than that of the power marked on the AC
outlet. There is a risk of fire. Do not connect heaters, hairdryers, or heating plates.
•
This device should be installed at least 10cm away from any walls. Care should be
taken to avoid this product radiating heat onto other devices. When installed in
racking, the handling instructions should be read carefully and adhered to. Failure
to do so will increase the product’s internal temperature and may lead to fire.
•
Never install this product in a washroom, sauna, or other location where water is
commonly found. This can lead to electrical shock.