Bartscher 370.160 User Manual - With Protective Terminal.
- 31 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device (see
rating plate). Connect the device only in case of compliance!
Connect the device only to properly installed single socket
with protective terminal.
•
The double griddle requires two separate power outlets.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
5.2 Operation
Before operation
•
Before the device operation clean it according to the instructions in section
6 “Cleaning”.
•
Before the first use heat the device without dough and leave it opened for approx.
1 hour with temperature set to 180 °C – 200 °C (sec tion “Starting and initial heating
of the device”). Due to the technological residuals smoke may be emitted during
heating. However, it is not dangerous for the user nor indicates any device damage.
That smoke will not be released during further operation. Assure good ventilation in
the room during the first heating.
•
Moisten the heating plates with food oil three or four times. In that way the pores in
the cast iron plates will be closed and special coating will be formed.
Starting and initial heating of the device
•
Prepare the waffle dough according to owned recipe or our proposal (section “Hints
and advices”).
•
Close the upper heating plate with use of handle.
•
Connect the device to the single correctly installed socket.
•
Set required temperature (up to 300 °C). The orang e indicator will come on which
indicates heating of the device.