Bartscher 370.160 User Manual - Hot Surface! Burn Hazard!
- 22 -
•
The supply cable must be disconnected from the socket only by
pulling the plug.
•
Never carry or lift the device by the supply cable.
•
In any case do not open the device housing. In case of electrical or
mechanical modifications the electric shock hazard will occur.
•
Never immerse the appliance, the power cord and the power plug in
water or other liquids; do not put it under running water and clean any
parts of the appliance in the in the dishwasher.
•
Do not use any acid agents and make sure no water ingresses the
device.
•
Never operate the device with moist hands or standing on wet floor.
•
Remove the plug from its socket:
-
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
HOT SURFACE! Burn hazard!
Follow the safety instructions listed in order to avoid the hazard:
•
The heating plates and external surfaces of the device become very
hot during the operation. In order to avoid burns never touch those
surfaces with bare hands and use only handles and temperature
controller knob during the operation.
•
Touching of hot baked food with bare fingers or hands may cause
burns. Hot baked food should be removed only with use of wooden or
plastic paddle resistant to high temperature.
•
The device remains hot also for some time after turning off, so
before cleaning or moving the device wait until it cools down.
•
Never move the device during work.