Basler IP Fixed Dome Camera Installation Manual - page 8
Other manuals for IP Fixed Dome Camera:
User Manual
Manual is about: IP Fixed Dome Camera
of
10
Pole Mount Kit Installation Guide
6
Basler IP Fixed Dome Camera
8. Obtain the split grommet from the installation kit.
Place the two cables in the grooves in the split
grommet as shown to the right.
Note: If you are using only one cable, use the split
grommet with only one groove.
9. In order for the connection to be weatherproof,
the cables must fit snugly in the grommet’s
grooves. If the cables are a loose fit:
a. Remove the grommet.
b. Increase the diameter of each cable where it
passes through the grommet by wrapping
several layers of high quality plastic tape
around the cable.
c. Reapply the grommet to the cable and check
the cables for a snug fit in the grooves.
Split
Grommet
Split
Grommet
Cables Must
Fit Snugly
in the Grooves