Bauhn ARDR-1116 Instruction Manual - Power On/off
3
1300 886 649
Model: ARDR-1116
Product Code: 55690 11/2016
www.tempo.org
AUS
Instructions
Power On/Off
1. Insert the power adaptor into the POWER PORT on the back of the radio
and connect the other end to a power outlet. The Retro Digital Radio clock
will turn on and automatically set the time.
2. Press the
POWER button to turn on the Radio.
3. Press the
SOURCE button to change between modes.
NOTE: To return to standby mode, press the POWER button again
DAB+ Operation
1. Press the
SOURCE button until DAB mode is selected.
2. If this is your first use, or you’ve moved to a new area, press the
SCAN
button to automatically scan for local stations.
3. To change between stations, rotate the
TUNE/SELECT dial to scroll
through the available stations. Once the preferred station has been found,
press the
TUNE/SELECT button.
4. Use the
VOLUME dial to adjust to your desired level.
NOTE:
• You can press the
INFO button to display additional information.
• If an alarm has been set, an alarm icon is shown on the clock display.
Dynamic Range Control (DRC)
In DAB mode:
Changing the dynamic range can affect the loudness and quality of the radio
programme that you are listening to, so that it will be more suited to your
listening conditions and your own personal listening requirements. e.g. In a
noisy environment, where quiet sounds might be difficult to hear, setting the
compression to maximum will boost the quiet sounds, whilst keeping the
loudest sounds at their original level.
There are 3 levels of compression:
DRC Off: no compression. This is the default setting.
DRC Low: medium compression.
DRC High: maximum compression.