Bauhn ARDR-1116 Instruction Manual - Adding A Station to Preset
5
1300 886 649
Model: ARDR-1116
Product Code: 55690 11/2016
www.tempo.org
AUS
Instructions (Cont.)
Adding a Station to Preset
1. Whilst in DAB or FM mode, tune into a station that you wish to add to your
Preset.
2. Hold the
PRESET button, select the preset number you wish to store the
station to, then press the
TUNE/SELECT button.
3. Rotate the
TUNE/SELECT dial until you reach your desired preset position.
Press the
TUNE/SELECT dial to set.
4. The LCD will display a confirmation message, such as ‘Preset 1 Stored’
NOTE: You can also quickly add a station to the 1, 2, or 3 memory button
by holding the respective button down on the front of the radio until it states
“Preset Stored”.
Retrieving a Preset Station
1. To retrieve a station from the 1, 2 or 3 memory button, press the respective
button on the front of the radio.
2. To retrieve a station from 4 to 10, press the
PRESET button, then rotate
the
TUNE/SELECT dial until the desired station is shown. Press the TUNE/
SELECT dial to select the station.
Bluetooth Operation
1. Press the
SOURCE button until BT mode is selected.
2. When Bluetooth mode is activated, it will commence pairing. Follow the
instructions on your Bluetooth enabled device to pair with ARDR-1116.
3. You can now play music through Bluetooth.
4. Use the
VOLUME dial to adjust to your desired output level.
5. Rotate the
TUNE/SELECT dial clockwise to go to the next song or anti-
clockwise to go to the previous song.
6. Press the
TUNE/SELECT dial to Play/Pause the current song.