BiPOM Electronics UVC Quick Start Manual - page 11
Page 11
6. How to embed the remote camera to the user's web page
You can also embed the remote UVC camera to web page.
Create your HTML page in any editor and add following HTML code:
height="[UVC HEIGHT]">
where:
[SERVER IP]
- IP of remote camera.
[SERVER PORT] - Port number what you entered when configured UVC Camera
[UVC WIDTH]
- Width in pixels. Should be the same as you selected when configured
UVC Camera
[UVC HEIGHT]
- Height in pixels. Should be the same as you selected when
configured UVC Camera
The example below show HTML code for camera installe don device with IP 192.168.1.20.
The UVC Camera server used port 8080 and resolution is 640x480:
height="480">
Below you can see whole HTML page which will show stream from UVC Camera:
HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
8859-1">
Gadget PC UVC stream video
height="480">