Bukh DV10 Workshop Manual - page 270
Other manuals for DV10:
Workshop Manual
Manual is about: Diesel
of
306
R26
009W2229-R01
Fitting of Bolts in Gearbox
Drive in the slotted pins 4x16 in
thebolts and fit the washers on the
bolts so that the lubricating groove
in them point to the wheel.
“NOTE”: The bolt must be fitted in
pos. 1 or 2 all depending
on the transmission.
Transmission:
GLL = AHEAD
GGL = ASTERN
Heat the gearbox and fit the bolts
with slotted pins in pos. 1 or 2 all
depending on the transmission.
Fit the hexagon nut and tighten it
with 100 Nm (10 kpm).
Fit the sleeve in the bolt bore
nearest the centre of the gear (see
the arrow).
Smear the hexagon nut with
unhardening packing material
before the fitting.