Bulldog Security DELUXE 500 Owner's Manual - ) Button
. .
23
LCD REMOTE CONTROL TRANSCEIVER
7. Enable / Disable Beep Sound While Pressing Button:
It has a short bi sound while pressing the button of the LCD screen
transceiver. If you want mute the bi sound mute always while press
button. Press the button first, within 3 seconds press and hold the
(
Bi
) button
for 2 seconds to disable the beep sound.
8. Low Battery Indication:
When the power of the battery weakens, it has two short beep sound
and flash
icon while pressing the button of the LCD screen transceiver.
9. Set Up Fixed Count Down Timer:
1. Press the
SET
button
first, within 3 seconds press and hold the
( ) button
for 2 seconds, the LCD screen will shows icon and timer
(ie. 0:10).
2. Press the
( ) button
again showing next order time on the screen
(ie.0:20), press them again (ie.0:30) ..and so on.
3. Leave the buttons starting count down then icon flashes.
Note:
1. The count down period is fixed as 10 minutes, 20 minutes, 30 minutes,
1 hour, 1.5 hours and 2 hours maximum.
2. When count down timer showing 0:00 means to turn off the timer.
3. Press the
SET
button
for real time indication when the timer is counting
down.
10. Out Of Range Indication:
The system will automatically check the range every 20 minutes after
armed.
1. If user is within the range, the icon will display on the LCD screen.
2. If user is out of range, it has five short bi sounds and the icon will
disappear on the LCD screen.
TIMER SETTING CHART:
Transceiver
Press
Button
Description
Transceiver Button
1 Press and hold the
Timer Setting
(Hour)
for
and for
+
SET
button for 3 sec.
*Flash digit for adjusting
Press the
SET
button once Time setting (Minute)
for
and for
+
*Flash digit for adjusting