Bulldog Security DELUXE 500 Owner's Manual - Button
. .
25
LCD REMOTE CONTROL TRANSCEIVER
EXIT: Press and hold the
SET
button
for 2 seconds or leave it for 10
seconds, the system will exit the programming mode.
1. Timer Setting: Example to AM10:30
1. Press and hold the
SET
button for 3 seconds, with two-melody sound
and the
Hours
digit flashes for adjusting.
2. Press the or
button
to decrease or increase the
Hour
digit
until AM
10
:xx.
3. Press the
SET
button once again then the
Minute
digit flashes for
adjusting.
4. Press the or
button
to decrease or increase the
Minutes
digit
until AM 10:
30.
5. Press the
SET
button
for 2 seconds with one-melody sound to confirm
exiting the timer program mode.
2. Alert Alarm Timer Setting: Example to PM 6:30
1. Press and hold the
SET
button
for 3 seconds, with two-melody sound
and the
Hours
digit flashes for adjusting.
2. Press the
SET
button
twice, the LCD screen will shows icon and
Hours
digit is flashes for adjusting.
3. Press the or
buttons
to decrease or increase the
Hour
digit
until
PM 6:xx.
4.
Press the
SET
button
once again then the
Minutes
digit flashes
for adjusting.
5. Press the or
button
to decrease or increase the
Minutes
digit
until
PM 6:30.
6. Press the
SET
button
once again then icon flashes for alert alarm
ON/ OFF
setting
7. Press the
button
to start the
Alert Alarm Timer,
and the
ON
icon will show on the LCD screen. Press the
button
to stop the
Alert Alarm Timer,
and the
OFF
icon will show on the LCD
screen.
8. Press
SET
button
for 2 seconds with one-melody sound to confirm
exit the timer program mode.