Bullet DVR dvr Operating Manual - page 14
1
operating
manual
operating manual
Product appearance and specifications are subject to change without notice
Click the
icon to convert the file you just selected . The new converted file will be saved in your work
folder, under the same name but with a new .MPG file extension .
If you check the Auto Convert option
the conversion process will
begin automatically, after you select the source file .
If the Auto Quit option is enabled
the Bullet DVR application will be
terminated, after the conversion process is completed .
For better performance, it is recommended that the source file remains on the CF memory card, and
the target file of your work folder is located on the local hard drive of your computer .
Advanced Configuration:
Allows you to change the path of the work folder . This folder contains
all your converted mpeg-2 files, as well as any mpeg-4 files you might have copied using the synchronize
feature of the program . In the example below, the current location of the work folder is H:\New Videos\.
To change the destination path, click on the
button and select the new work folder from
your computer’s hard drive .
About:
Displays information about the current software and firmware versions . This is useful
when you need technical assistance, so you can relay the exact product version you are using . The
information appears as in the example below:
Saving your profile
:
After you make any changes to the configuration file, you must save the new parameters in order to
make them effective . Click on the Save All Profile icon
to do so . By default, the first profile name
is Profile0 and you can change its name by clicking on the Rename Current Profile icon
. You
may add a new profile by clicking on the Add New Profile Item icon
. This is useful if you want to
keep more than one set of pre-configured profiles to use for different applications, without having to
reconfigure the unit every time . You can quickly change from one profile to another, by selecting it from
the pull-down menu on the right
. If you want to reset a profile back to its
default settings, load up the profile and click on the Reset icon
If you need to delete a profile from this list, click on the Delete Current Profile icon
. If you click on the
Reload Last Saved Configuration icon
, the program will load up the latest saved configuration file
device.ini . If you click the Backup and Restore icon
, you can import or export a configuration file .
Using the Control Panel buttons
:
It is also possible to change the configuration of the Bullet DVR unit, using the buttons located on the
control panel, and with the LCD screen located at the front of the device .
Pressing the Record button
will return to the previous menu, while pressing the Stop Button
will select the current menu item, or save the new configuration . You can navigate up or down within
each menu, by pressing the arrow keys
.
To enter the configuration menu, press and hold the Stop button for at least seconds. Once you enter
the menu, if you don’t press any buttons within 10 seconds, the system will exit the configuration menu
automatically .