Bungard NE-CUT Original Instructions Manual - Ne-Cut-Manual-E
ne-cut-manual-e
Page 2 / 10
Description
NE-CUT is designed to cut FR4 PCB boards up to 3.0 mm or aluminium up to 2 mm thickness. Depending
on customer application cutting of steel (depending on the alloy up 0.8 mm) and plastic (up to 5 mm) is
also possible same as paper or film material.
The transparent hood allows to cut single sheets by eye sight.
Features
•
Cutting width max. 530 mm
•
Two knifes made of hardened and ground steel
•
Spring loaded built-in clamping unit in the front
•
front side stop with metric scale (0.1 mm tolerance repeatability)
•
Fully adjustable back stop with metric scale for batch work (0.1 mm tolerance repeatability)
•
Adjustment range of back stop 0 - 300 mm
•
Smallest cutting size (front) 45 mm
•
Durable full steel construction
•
All angular and dimension determining parts adjustable
•
Simple exchange of blades
•
Adjustable cutting angle
•
Adjustable clearance
Technical Data
Dimensions (L x H x D):
74 cm x 29 cm x 45 cm
Weight:
66 kg
Cutting Length:
max. 530 mm
Adjustment range of back stop:
0 - 300 mm
Smallest cutting size (front)
45 mm
max. Board Thickness FR4
3.0 mm
max. Board Thickness Aluminium
2.0 mm
max. Board Thickness Plastic
5.0 mm
max. Board Thickness Steel
0.8 mm
Annotation: the board cutter is preset for board thickness up to 3.0 mm. If you need to cut thicker material
you need to adjust the upper blade and the clamping unit.
Technical changes reserved
Possible Options
parallel front stop (similar to picture 1)
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 2292 / 9 28 28-0, Fax: +49 2292 / 9 28 28-29, E-mail: support@bungard.de
Picture 1