Bunker Hill Security 62368 Owner's Manual & Safety Instructions - Connecting A/v Output
Page 11
For technical questions, please call 1-888-866-5797.
Item 62368
Sa
Fety
Opera
ti
O
n
n
etw
O
rk
Setting
S
Menu > Settings
1. Touch then select
Settings.
2.
Date & time: Set date and time, then touch Ok.
note: Time is in 24 hour format.
3.
Video Output: Select ntSC, then touch Ok..
4.
Format Memory: Select yes or no, then touch Ok.
CaUtiOn: touching Ok while yes is selected
will erase all files from the Micro SD Card.
5.
alarm Volume: Touch
V
to increase volume.
Touch
V
to decrease volume, then touch
Ok.
note: This function also controls the
volume when using
aV Output.
6.
auto Mute: To mute Cameras when sound level
is low.
Select
On or OFF, then touch Ok.
7.
Default Settings: To return all Settings to factory
default settings. Select
yes or no, then touch Ok.
Menu > Detect
1. Touch then select
Detect.
2. Select Camera, then touch
Ok.
3. Select
Sensitivity Settings, then touch Ok.
4. Repeat steps for other Cameras.
Menu > Brightness
To control the brightness of each Camera.
1. Touch
to select a Camera.
2. Touch then select
Brightness.
3. Touch
V
to increase brightness.
Touch
V
to decrease brightness, then touch
Ok.
4. Repeat steps for other Cameras.
Menu > Screen Saver
To conceal the fact that the Receiver is a Security System.
1. Touch then select
Screen Saver.
2. Select
Blank Screen for a blank screen
or select
photo Frame to add your
own image(s), then touch
Ok.
note: To add your own image(s), see
Using Screen Saver on page 14.
3.
photo Frame:
a.
transition timing: Select the amount of time
each image will display, then touch
Ok.
b.
transition Options: Select the way the
images will transition, then touch
Ok.
Menu > pairing
When adding Cameras, they will need to be programmed manually (paired) to work with the Receiver.
1.
Before installing Camera(s):
a. Connect the Power Adapter’s cord
to the Camera’s Power cord.
b. Plug the Power Adapter into a 120VAC outlet.
c. Determine which Channel is available to use.
d. Touch then select
pairing.
e. Select the Channel.
f. Press and release the Pair Button
on the back of the Camera.
2. Install Camera(s) according to
Mounting on page 9.
Connecting a/V Output
To view on another device, such as a television.
1. Connect black plug of RCA Cable into
aV Out port on back of Receiver.
2. Connect white and yellow plugs into
corresponding inputs on device.
3. Press and release
aV
to view on device.