CABASSE ALTURA Manual - page 17
e
n
g
l
i
s
h
black to black). Connect the CINCH RCA output of the Max
Cabasse module to one of the CINCH RCA LINEIN post of
the LARGO subwoofer with a shielded interconnect cable.
Connect the subwoofer CINCH-RCA output of the audio video
amplifier to the second CINCH RCA LINE IN post of the LAR-
GO subwoofer.
Then adjusts the set-up menu of your audio video amplifier:
ADJUSTMENTS
OF THE L ARGO SUBWOOFER
Crossover frenquency
In any cases configuration 2.1 or configuration 5.1, the adjust-
ment of frequencies CROSSOVER FREQUENCY is positioned
as follows:
Level
The adjustment of the LEVEL will depend upon room positio-
ning, type of amplifier, etc. With the LARGO subwoofer, the ave-
rage position of the LEVEL control is as follows:
For an optimum adjustment of this level, we advise you to car-
ry it out starting from a stereo source (CD).
To adjust the level of the low frequency effect channel, (LFE)
do not modify the sound level of the LARGO subwoofer but go
into the set-up menu of your audio video amplifier 5.1 and
adjust the SUBWOOFER / LFE channel.
2 main speakers + 3 LINEA speakers
+ 1 LARGO subwoofer + 1 Max module
FRONT
LARGE
CENTER
SMALL
SURROUND
SMALL
SUBWOOFER / LFE
YES
5 LINEA speakers + 1 LARGO subwoofer
+ 1 Max module
FRONT
LARGE
CENTER
SMALL
SURROUND
SMALL
SUBWOOFER / LFE
YES
Brackets for on wall vertical
and horizontal positioning
(C) Pins for horizontal use on shelf
(D) Base
for vertical use
on shelf
ASSEMBLING THE LINEA ON BASE ACCESSORIES
(A)
(B)
Cab notice Altura gamme 2005-4 28/10/05 9:59 Page 17