CABASSE SANTORIN 25 Owner's Manual - page 9
For 3 iO2 speakers and 2 large bandwidth front speakers:
SANTORIN 25 SUBWOOFER
ADJUSTMENTS
In any cases configuration 2.1 or configuration
5.1, the adjustment of frequencies CROSSOVER
FREQUENCY is positioned as follows:
The adjustment of the LEVEL will depend upon
room positioning, type of amplifier, etc. With the
Santorin 25 subwoofer, the average position of
the LEVEL control is as follows:
For an optimum adjustment of this level, we advise you to car-
ry it out starting from a stereo source (CD).
To adjust the level of the low frequency effect channel, do not
modify the sound level of the Santorin 25 subwoofer but go into
the set-up menu of your audio video amplifier 5.1 and adjust
the SUBWOOFER / LFE channel.
WARRANT Y
We thank you for registering the Cabasse warranty within 60
days after their date of purchase. You can either send us the
enclosed warranty card fully completed or register on line at
www.cabasse.com
. In our web site you will also find infor-
mation on the Cabasse manufacturer warranty.
Thanks to the above information, your system is now nicely set
up and you will enjoy your speaker system for many years. We
receive every day letters from customers expressing the ever
growing satisfaction and musical emotion they have been get-
ting with our speakers over the years. These letters are our first
motivation.
e
n
g
l
i
s
h
Because of technical improvements already under way in our constant search for optimum quality, Cabasse reserves the right to modify all the models
presented in specification sheets, advertising materials and manuals without prior notice.
Our web site www.cabasse.com will give you the specific adjustments we recommend for the use of our active subwoofers.
Installation
2/7 channels
active subwoofer
Ways
2 1
Drivers
tweeter-midrange 2 ways coaxial
25S20 model - 25 cm / 10’
DOM25/13F15-2
Crossover frequency
DOM25/13F15-2 at 2,700 Hz
Frequency bandwith
180 - 20 000 Hz
30 - 150 Hz
in semi-reverberating chamber
in semi-reverberating chamber
Pulsed sound pressure
111 dB
Efficiency
93 dB/2.8 v/1 m
High-pass filter
180 Hz
Nominal impedance
8 ohms
Minimum impedance
3.8 ohms
active
Power handling
80 W
250 W
Peak power handling
560 W
750 W
Lowpass cut-off frequency
from 40 to 180 Hz
Phase switch
0 ° normal, 180 ° reverse
Input
2 low level, 2 high level
Magnetic shielding
yes -
Voltage
115/230 V, AC - 50/60 Hz
Maximum power consumption
165 W
Diameter of the sphere
16 cm - 6.3 in
iO2 base version dimensions (h x w x d)
19 x 16 x 20 cm - 7.5 x 6.3 x 8 in
42 x 36 x 38 cm - 16.5 x 14.2 x 14.6 in
weight
2.2 kg - 4.9 lb
19 kg - 42 lb
iO2 stand version dimensions (h x w x d)
112 x 33 x 33 cm - 44 x 13 x 13 in
weight
11.5 kg - 25 lb
iO2 in ceiling
dimensions (h x w x d)
Ø 26 cm/ 10.2 in
weight
2 kg - 4.4 lb
SPECIFICATIONS
iO2 SPEAKER
SUBWOOFER SANTORIN 25
TECHNICAL DATA
FRONT
LARGE
CENTER
SMALL
SURROUND
SMALL
SUBWOOFER STEREO
NO
SUBWOOFER / LFE
YES
SUBWOOFER FREQUENCY
180 Hz
Cab notice iO2-04 30/08/06 15:27 Page 9