9032058-01 smartswitch 9000 9f426-03 local management appendix.
1 appendix 9f426-03 module specific information introduction this appendix contains local management information that is specific to the 9f426-03 fddi switch module. Module interfaces the 9f426-03 fddi switch module has 8 interfaces. Table 1 lists the identifying number, name, and description of eac...
9f426-03 module specific information 2 use the numbers listed in table 1 to configure the module’s default interface (see general configuration screen in the smartswitch 9000 module local management user’s guide )..
3 9f426-03 module specific information ring map configuration screen the ring map configuration screen (figure 1), contains configuration and connection information and displays the topology of the fddi rings connected to the module. Figure 1. Ring map configuration screen smartswitch 9000 local man...
9f426-03 module specific information 4 ring map configuration screen fields the following information briefly explains each ring map configuration screen field. Fddi address displays the address of the module. The format of this address (either mac or canonical) is determined by the value you select...
5 9f426-03 module specific information the ring map the ring map shows a series of addresses in upstream/downstream order. These addresses, which represent each fddi device attached to the ring, are arranged on the screen to simulate the circular fashion of a ring. When first displayed, the station ...
9f426-03 module specific information 6 ring map node screen the ring map node screen (figure 2), displays specific information for a selected fddi node on the ring map. Figure 2. Ring map node screen smartswitch 9000 local management ring map node module name: 9f426-03 firmware revision: 01.04.10 sl...
7 9f426-03 module specific information ring map node screen fields the following information briefly explains each ring map node screen field. Address displays the address of the selected node. Upstream address displays the address of the selected node’s nearest upstream neighbor. Node class display...
9f426-03 module specific information 8 switch configuration screen the switch configuration screen (figure 3), displays parameters you can configure to make the switch operational. Figure 3. Switch configuration screen smartswitch 9000 local management switch configuration module name: 9f426-03 firm...
9 9f426-03 module specific information switch configuration screen fields the following information briefly explains each switch configuration screen field. Type of sta (toggle) allows you to set the method that bridges use to decide which bridge is the controlling (root) bridge when two or more bri...
9f426-03 module specific information 10 full duplex configuration screen the full duplex configuration screen (figure 4), allows you to specify transmit and receive settings for the module’s front panel ports. Figure 4. Full duplex configuration screen smartswitch 9000 local management full duplex c...
11 9f426-03 module specific information full duplex configuration screen fields the following information briefly explains each full duplex configuration screen field. Operation mode (toggle) lets you determine whether the specified port will transmit and receive data separately or simultaneously. Y...
9f426-03 module specific information 12.
