9034041 smartswitch 9000 9x4xx series local management appendix (fw version 1.12.00 or greater).
1 appendix 9x4xx series local management this appendix supplements the smartswitch 9000 local management user’s guide, part number 9032089-01. The latest firmware version (1.12.00) features new local management screens that are described in this appendix. For further information about cabletron prod...
9x4xx series local management 2 access control screen the access control screen, figure 1, allows a user to assign up to 16 ip addresses, in order to limit remote management access of the smartswitch 9000 modules. This feature can be enabled or disabled, and it does not operate when a user accesses ...
3 9x4xx series local management access control screen fields the following information briefly explains each access control screen field: access control lists (toggle) this field can be either of the following: • disabled • enabled ip addresses (modifiable) these fields allow a user to input up to 1...
9x4xx series local management 4 flash download configuration screen the flash download configuration screen, figure 2, allows a user to replace the information stored in the flash memory with a new image file downloaded from a tftp server. Before downloading an image to the device, copy the image to...
5 9x4xx series local management flash download configuration screen fields the following information briefly explains each flash download configuration screen field: download method (selectable) this field indicates the download or upload method used by the device, and can be one of the following: •...
9x4xx series local management 6 reboot after download (toggle) (only available for the runtime option) this field notifies a user that the module will reboot after the download is complete. This field toggles between the following: • yes - the module reboots after the download is completed. • no - t...
7 9x4xx series local management 8. Enter the ip address of the tftp server using the standard quad dotted octet format. 9. Use the arrow keys to highlight the download file name field. 10. Enter the complete path and file name of the image stored on the download server. 11. Use the arrow keys to hig...
9x4xx series local management 8 phy configuration (full duplex fddi) the phy configuration screen, figure 3, provides support for the dec (digital equipment corporation) full duplex fddi option. Note : this screen is used only on the 9f4xx-series modules. To access the phy configuration screen, go t...
9 9x4xx series local management phy configuration screen fields the following information briefly explains each phy configuration screen field: port # (read only) this field shows which fddi port is being referenced. Requested mode (toggle) this user-configurable field offers three configuration opt...
9x4xx series local management 10 saving modifications to save your modifications of the values on the phy configuration screen: 1. Use the arrow keys to highlight save at the bottom of the screen, then press the return key. 2. When the message “saved ok” displays, the edits you have made are saved. ...
11 9x4xx series local management port redirect screen the port redirect screen, figure 4, allows a user to set each front panel port as a source or destination port. Frames received on the source port can be redirected to the destination port. For example, port 1 can be set as the source port with p...
9x4xx series local management 12 port redirect screen fields the following information briefly explains each port redirect screen field: source port (read-only) this field displays which ports are currently set as source ports. Destination port (read-only) this field displays corresponding ports tha...
13 9x4xx series local management slot configuration the slot configuration screen, figure 5, allows a user to configure ip addresses for individual 9x4xx series modules, which support firmware version 1.12.00 or greater. To access the slot configuration screen, go to the module menu screen. Then, se...
9x4xx series local management 14 slot configuration screen fields the following information briefly explains each slot configuration screen field: slot # (read-only) this field displays the slot number of the chassis where the module is located. Module name (read-only) this field displays the name o...
