Cabletron Systems SmartSwitch 9000 Appendix - Access Control Screen
9X4XX Series Local Management
2
Access Control Screen
The Access Control Screen, Figure 1, allows a user to assign up to 16 IP addresses,
in order to limit remote management access of the SmartSwitch 9000 modules.
This feature can be enabled or disabled, and it does not operate when a user
accesses it locally through the Environmental Module EPIM port or through a
module front panel port.
To access the Access Control Screen, go to the Module Configuration Menu
Screen, Then, select the SNMP Configuration option. Finally, select the Access
Control List
option.
Figure 1. Access Control Screen
SmartSwitch 9000 Local Management
Access Control
Module Name: 9F426-02
Firmware Revision: 01.12.00
Slot Number: 10
BOOTPROM Revision: 01.01.01
Access Control Lists: [DISABLED]
IP Addresses
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SAVE
EXIT
RETURN