9032179-01 smartswitch 9000 9e106-06 local management appendix.
1 appendix 9e106-06 module specific information introduction this appendix contains local management information that is specific to the 9e106-06 ethernet module. Module interfaces the 9e106-06 ethernet module has 9 interfaces. Table 1 lists the identifying number, name, and description of each inte...
9e106-06 module specific information 2 fnb resource configuration codes the 9e106-06 ethernet module provides connectivity between seven interfaces: the six front panel ethernet interfaces and the fddi rings on the backplane (fnb- 1 or fnb-2). The fnb resource configuration screen allows you to conn...
3 9e106-06 module specific information interface statistics screen the 9e106-06 interface statistics screen (figure 1),, displays a variety of statistical information about the module. Figure 1. 9e106-06 interface statistics screen interface statistics interface: 3 interface: 4 interface: 5 in octet...
9e106-06 module specific information 4 interface statistics screen fields the following information briefly explains each interface statistics screen field. Interface (toggle) allows you to select the interface you want to monitor. In octets (read-only) displays the number of octets (bytes) received...
5 9e106-06 module specific information out octets (read-only) displays the number of octets (bytes) transmitted by this interface. Out unicast pkts (read-only) displays the number of unicast packets (packets destined for one specific address) transmitted by this interface. Out nonucast pkts (read-on...
9e106-06 module specific information 6 selecting another interface to select another interface: 1. Use the arrow keys to highlight any one of the interface fields at the top of the interface statistics screen. 2. Press shift and [=] or [-] until the desired value appears. 3. Press the enter key. Sta...
7 9e106-06 module specific information port redirect function screen the 9e106-06 port redirect function screen (figure 2),, allows you to set each one of the ports as a source or destination port. You can set a port to have one or more destination ports. For example, you can set port 1 as a source ...
9e106-06 module specific information 8 port redirect function screen fields the following information briefly explains each port redirect function screen field. Source port (read-only) displays the port number of the ports that are set as source ports. Destination port (read-only) displays the port ...
9 9e106-06 module specific information 6. Use the space bar to select either the [add] or [del] option, then press the enter key. This adds or deletes the port selections made in steps 2 through 4, and also updates the source port and destination port list. To redirect another port, repeat steps 1 t...
9e106-06 module specific information 10
