Cabletron Systems BRIM-W6 User Manual - 1.5
CHAPTER 1:
INTRODUCTION
1-4
BRIM-W6 USER’S GUIDE
1.5
BRIM-W6 SPECIFICATIONS
This section describes the environmental specifications and
safety/approval requirements for the BRIM-W6. Cabletron Systems
reserves the right to change these specifications at any time without
notice.
Environmental Requirements
Operating Temperature:
+5
°
to +40
°
C (41
°
F to 104
°
F)
Non-operating Temperature: -30
°
to +90
°
C (-22
°
to 194
°
F)
Operating Humidity:
5% to 95% (non-condensing)
Safety
This unit meets the safety requirements of UL1950 (without D3
deviations), CSA C22.2 No. 950, and EN60950.
EMI
This unit meets the EMI requirements of FCC Part 15 Class A, EN55022
Class A and VCCI Class I.
EMC
This unit meets the EMC requirements of EN 50082-1 including: IEC
801-2 (ESD) levels 1 through 4, IEC 801-3 (Radiated Susceptibility)
levels 1 through 4, and IEC 801-4 (EFT/B) levels 1 through 4.
NEBS
This unit has been tested by Bellcore and found to comply with the
following Bellcore standards:
TR-NWT-000063 Network Equipment Building System (NEBS)
Generic Equipment Requirements.
GR-1089-CORE EMC and Electrical Safety Generic Criteria for
Network Telecommunications Equipment.
It is the responsibility of the person who sells the system in
which the BRIM-W6 will be installed to ensure that the total
system meets allowed limits of conducted and radiated
emissions.
WARNING