Cabletron Systems Cabletron SmartSwitch Router 510 Installation And Configuration Manual - page 33
Manual is about: Cabletron SmartSwitch Router Installation & Configuration Guide
of
106
Installing and Cabling
2-3
Assembling the Rack Mount Shelf
Figure 2-1 shows the rack mount shelf. The following table provides
installation instructions.
Step
Action
1
Attach two rack mount brackets (4) to the base (1) using four flat
headed #6-32 screws (see Figure 2-1).
The brackets can be attached in two positions flush or receded.
2
Go to the section titled Assembling Adhesive Strips.