1. DL manuals
  2. Cabletron Systems
  3. Switch
  4. MMAC-Plus 9M426-02
  5. Reference Manual

Cabletron Systems MMAC-Plus 9M426-02 Reference Manual

Other manuals for MMAC-Plus 9M426-02: User Manual

Summary of MMAC-Plus 9M426-02

  • Page 1

    9032253-01 smartswitch 9000 9m426-02 local management appendix.

  • Page 3: Appendix

    1 appendix 9m426-02 module specific information introduction this appendix contains local management information that is speciÞc to the 9m426-02 dual hsim switch module. This module has two slots for two high speed interface module (hsim) interfaces (not included and may be purchased separately). Th...

  • Page 4: Module Interfaces

    9m426-02 module specific information 2 module interfaces the 9m426-02 module can have as few as 8, and as many as 112, interfaces. Table 1 lists the identifying number, name, and description of each interface. If the hsims installed are atm, ports 9Ð112 are atm virtual ports. The default interface i...

  • Page 5

    3 9m426-02 module specific information local management screens hierarchy figure 1 shows the hierarchy for the 9m426-02 module local management screens. Figure 1. 9m426-02 lm screen hierarchy system resources hsim configuration screens flash download broadcast suppression general configuration snmp ...

  • Page 6: Switch Configuration Screen

    9m426-02 module specific information 4 switch configuration screen the switch conÞguration screen (figure 2) provides the basic setup options to make a switch operational in your network. Figure 2. Switch configuration screen mmac-plus local management switch configuration module name: 9m426-02 firm...

  • Page 7

    5 9m426-02 module specific information switch configuration screen fields the following information brießy explains each switch conÞguration screen Þeld. Switch address (read-only) displays the mac address of the switch. Number of ports (read-only) displays the total number of switched ports on the ...

  • Page 8

    9m426-02 module specific information 6 the blocking state is entered in either of two ways: ¥ following initialization of the switch. ¥ from the disabled state when management enables the interface. The blocking state is exited in any of three ways: ¥ when a protocol timer expires. ¥ when a conÞgura...

  • Page 9

    7 9m426-02 module specific information the learning state is exited in any of three ways: ¥ when a protocol timer expires (the learning state is then entered). ¥ when a bpdu is received on this port or another port (the blocking state is then entered). ¥ through management action (either the blockin...

  • Page 10: System Resources Screen

    9m426-02 module specific information 8 system resources screen the system resources screen (figure 3) displays information about the amount of flash memory, dram, and nvram that is installed and how much of that memory is available. Figure 3. System resources screen mmac-plus local management system...

  • Page 11

    9 9m426-02 module specific information system resources screen fields the following information brießy explains each system resources screen Þeld. Cpu type (read-only) indicates the microprocessor, and the speed (in mhz) at which it is operating. Flash memory installed/available (read-only) indicate...

  • Page 12: Hsim Configuration Screens

    9m426-02 module specific information 10 hsim configuration screens for complete information about hsims, refer to the hsim userÕs guides, available (in portable document format) from the world wide web, at the following site: http://www.Cabletron.Com/.

  • Page 13: Flash Download Screen

    11 9m426-02 module specific information flash download screen the flash download screen (figure 4) allows you to choose the method of downloading ßash, and whether or not the module will reboot after the download. Figure 4. Flash download screen mmac-plus local management flash download module name:...

  • Page 14

    9m426-02 module specific information 12 flash download screen fields the following information brießy explains each flash download screen Þeld. Download method (selectable) toggles between tftp, runtime and bootp. ¥ if set for bootp, the module sends out a bootp request to determine the ip address o...

  • Page 15

    13 9m426-02 module specific information using tftp to download image file to download an image Þle using tftp: 1. Use the arrow keys to highlight the download method Þeld. 2. Press the space bar to select tftp . 3. Use the arrow keys to highlight the tftp gateway ip addr Þeld. 4. Set the ip address ...

  • Page 16

    9m426-02 module specific information 14 7. Use the arrow keys to highlight the download server ip Þeld. 8. Enter the ip address of the tftp server using the standard quad dotted octet format. 9. Use the arrow keys to highlight the download file name Þeld. 10. Enter the complete path and Þle name of ...

  • Page 17: Broadcast Suppression Screen

    15 9m426-02 module specific information broadcast suppression screen the broadcast suppression screen (figure 5) allows you to throttle the forwarding of broadcast packets. You can set limits. Figure 5. Broadcast suppression screen mmac-plus local management broadcast suppression module name: 9m426-...

  • Page 18

    9m426-02 module specific information 16 broadcast suppression screen fields the following information brießy explains each broadcast suppression screen Þeld. Port# (read-only) the number of the port receiving and forwarding the broadcast packets. Total rx (read-only) the total number of broadcast pa...

  • Page 19

    17 9m426-02 module specific information smarttrunk configuration screen the smarttrunk conÞguration screen (figure 6) allows you to logically group interfaces together between devices to achieve greater bandwidth between the devices. Figure 6. Smarttrunk configuration screen 03/17/1998 14:58:34 mmac...

  • Page 20

    9m426-02 module specific information 18 smarttrunk configuration screen fields the following information brießy explains each smarttrunk conÞguration screen Þeld. Port # (read-only) lists each mib ii interface number capable of smarttrunking on the selected module. If the number of listed ports is m...

  • Page 21: Switch Statistics Screen

    19 9m426-02 module specific information switch statistics screen the switch statistics screen (figure 7) displays information about frames received, transmitted, Þltered, and forwarded. Figure 7. Switch statistics screen mmac-plus local management switch statistics module name: 9m426-02 firmware rev...

  • Page 22

    9m426-02 module specific information 20 switch statistics screen fields the following information brießy explains each switch statistics screen Þeld. Port # (read-only) identiÞes the 802.1d bridge port number. Frames rcvd (read-only) displays the number of frames received by this port. Frames txmtd ...

  • Page 23: Interface Statistics Screen

    21 9m426-02 module specific information interface statistics screen the interface statistics screen (figure 8) displays mib ii interface statistics and information. Figure 8. Interface statistics screen mmac-plus local management interface statistics module name: 9m426-02 firmware revision: 01.00.03...

  • Page 24

    9m426-02 module specific information 22 interface statistics screen fields the following information brießy explains each interface statistics screen Þeld. Interface (read-only) displays the interface number for which statistics are currently being displayed. Figure 8 shows the interface Þeld displa...

  • Page 25

    23 9m426-02 module specific information outunicast (read-only) displays the total number of frames transmitted that were sent to a single address. Outnonunicast (read-only) displays the total number of frames transmitted to a broadcast or multicast address. Outdiscards (read-only) displays the total...

  • Page 26

    9m426-02 module specific information 24 duplex mode (read-only) indicates whether the interface is operating in normal (standard) or full duplex mode. This Þeld displays either ÒstandardÓ or Òfull duplexÓ. Interface [ nn] (command) use this command to enter an interface number for viewing statistics...