Cabletron Systems MMAC-Plus 9M426-02 Reference Manual - page 25
23
9M426-02 Module Specific Information
OutUnicast (Read-Only)
Displays the total number of frames transmitted that were sent to a single
address.
OutNonUnicast (Read-Only)
Displays the total number of frames transmitted to a broadcast or multicast
address.
OutDiscards (Read-Only)
Displays the total number of outbound frames that were discarded, even though
the frames contained no errors. This Þeld may increment, because the switch
needed to free up buffer space, or the switch was being overutilized.
OutErrors (Read-Only)
Displays the total number of outbound frames discarded because they contained
errors. This Þeld represents the total number of errored frames, regardless of the
cause of the error.
OutQLen (Read-Only)
Displays the length of the frames queue. The Þeld represents the total number of
frames that can be contained in queue.
Address (Read-Only)
Displays the MAC address of the interface that is currently being displayed.
Last Change (Read-Only)
Displays the last time that the interface was reset.
Admin Status (Read-Only)
Displays the current status of the interface. If this Þeld displays ÒTestingÓ, no
frames may be passed on this interface.
Oper Status (Read-Only)
Displays the current status of the interface. If this Þeld displays ÒTestingÓ, no
frames may be passed on this interface.
MTU (Read-Only)
Displays the maximum frame size (in octets) that a frame may contain to be
received or transmitted from this interface.
Speed (Read-Only)
Displays the theoretical maximum of the interfaceÕs bandwidth in bits per second.
Link Status (Read-Only)
Displays the current link status of the interface. This Þeld displays either ÒLinkÓ
or ÒNo LinkÓ.