Cabletron Systems MR-9000TPT User Manual - page 16
Manual is about: ETHERNET MULTIPORT REPEATER
of
22
Page 3-2
1. AUI Port
2. Cable Support Bar
3. Mounting Screws (2)
4. On/Off Switch
Figure 3-1. Installation
5.
Attach the cable segment(s) to the RJ-45 ports 1 - 8.
6.
Plug the power cord into the power receptacle located next to the
On/Off switch (4) on the back of the repeater.
7.
Plug the power cord into a wall receptacle.
8.
Use the cable ties to provide strain relief for the cables and the
power cord. Strap the cables to the cable support bracket located
on the back of the repeater.
3
2
4
INSTALLING THE MR-9000TPT