Cabletron Systems MR-9000TPT User Manual - page 9
Page 2-1
CHAPTER 2
SPECIFICATIONS AND REQUIREMENTS
2.1
SPECIFICATIONS
Listed below are the electrical and physical specifications of the
MR-9000TPT. Cabletron Systems reserves the right to change these
specifications at any time without notice.
General Specifications
Start of packet delay times
Twisted pair in to
AUI out:
1300 ns max.
Twisted pair in to
twisted pair out:
1450 ns max.
AUI in to
twisted pair out:
1050 ns max.
Collision to JAM delay times
Twisted pair in to
AUI out:
750 ns max.
Twisted pair in to
twisted pair out:
950 ns max.
AUI in to
twisted pair out:
850 ns max.
Preamble
Input:
40 bits minimum to a maximum of 64
bits. Packets that do not meet this
range are discarded as runts or giants.
Output:
64 bits minimum (last 2 bits are 1,1).
JAM output:
JAM pattern (1,0) is sent to all
segments when one segment detects a
collision.
SPECIFICATIONS AND REQUIREMENTS