Installation manual ct-saw860 audio/video modulator 1.
Package contents this package contains: one ct-saw860saw-filtered audio/video modulator one ct-saw860 installation manual product description the ct-saw860 is an all solid-state audio/video modulator that provides a modulated video and aural rf carrier output on a fixed channel from 54mhz to 860mhz....
Specifications ct-saw860 saw-filtered audio/video modulator specifications (typical) rf 1.Output channels tv vhf: 2-13, uhf: 14-69, catv: 2-127 2.Output level +55 dbmv (minimum) .Output level range 13 db 4.A/v carrier ratio -7db to -22db 5.Spurious output -60 db below video carrier (@a/v carrier rat...
1. Unpacking and handling each unit is shipped with all equipment assembled, and factory tested. Ensure that all accessories are removed from the container before discarding packing material 2. Mechanical inspection inspect the front and rear of the equipment for shipping damage. Make sure the equip...
4. Hardware connections a. The ct-saw860 is designed for installation in a standard 19” ela rack. B. Connect a 75ohm coaxial cable with f-connectors from the video source’s audio output port to the ct-saw860’s audio input port. C. Connect a 75ohm coaxial cable with f-connectors from the video source...
8. Troubleshooting a. Ensure you are using quality multiple shielded cables with quality radial or compression f-connectors. B. Ensure the f-connector’s center conductor is making solid contact with the c- saw860’s video input, audio input, and rf output ports. C. If the ct-saw860 is receiving power...
