CAC / BDP KSACN0201AAA Owner's Manual - page 5
5
TIMER SETTING
Under the ON/OFF state, press TIMER to set TIMER OFF/ON.
S
TIMER ON mode: Press TIMER and the LCD displays
xx.x hour, with “ON” blinking. Press
or
to adjust the
timing value. Next, press ENTER/CANCEL to confirm.
S
TIMER OFF mode: Press TIMER, if LCD does not
display xx.x hour, it means the timer setting was cancelled
(Fig. 11 displays the TIMER OFF setting, under the ON
state). Press
or
to adjust the timing value. Next, press
ENTER/CANCEL to confirm.
S
CANCEL TIMER: After setting the timer, if TIMER is
pressed, LCD will not display “xx. HOUR” so the timer
setting is canceled.
Fig. 11 displays the TIMER OFF setting under the unit’s ON state.
Fig. 12 Displays the TIMER ON setting under the unit’s OFF state.
Fig. 11
-
Timer off Setting under the unit’s ON state
Fig. 12
-
Timer off Setting under the unit’s OFF state
Timer range: 0.5−24 hours
Every press of
or
increases or decreases the set time by 0.5 hour, If either of the arrows are pressed continuously, the set time will
increase or decrease by 0.5 hour ever 0.5 seconds.