CAC / BDP KSACN0201AAA Owner's Manual - page 6
6
SWING MODE
S
SWING ON: Press FUNCTION under the unit’s ON state
to activate the SWING function and
blinks. Next, press
ENTER/CANCEL to confirm.
S
SWING OFF: When the SWING function is on, press
FUNCTION to enter the SWING setting interface
. Next,
press ENTER/CANCEL to cancel the function (see Fig. 13).
Fig. 13
-
Swing mode
NOTES:
The SLEEP, TURBO or BLOW mode is the same as the SWING mode.
After the setting is made, the user must press ENTER/CANCEL to revert to the setting status or the unit stops operating automatically
five seconds later.
SLEEP MODE
S
SLEEP ON: Press FUNCTION under the unit’s ON
state until the unit enters the SLEEP mode. Press
ENTER/CANCEL to confirm.
S
SLEEP OFF: When the SLEEP function is activated,
press FUNCTION to enter the SLEEP mode. Next, press
ENTER\CANCEL to exit the function.
In the COOLING or DRY modes, the temperature increases by
1.8
_
F (1
_
C) after the unit runs under the SLEEP mode for 1 hour
and 1.8
_
F (1
_
C) after another hour. Afterwards, the unit will
continue to run at this temperature.
In the HEATING mode, the temperature decreases by 1.8
_
F (1
_
C)
after the unit runs under SLEEP 1 for one hour and 1.8
_
F (1
_
C) after
another hour. Afterwards, the unit runs at this temperature (see Fig.
14).
Fig. 14
-
Sleep mode