1. DL manuals
  2. CAD Audio
  3. Microphone system
  4. CADLive WX3000
  5. Manual And Quick Start-up Manual

CAD Audio CADLive WX3000 Manual And Quick Start-up Manual

Summary of CADLive WX3000

  • Page 1

    Cad audio corporate offices 6573 cochran rd., bldg.I solon, oh 44139 u.S.A. Www.Cadaudio.Com distributed worldwide by american music and sound 925 broadbeck drive, suite 220 newbury park, ca 91320 u.S.A. Tel: (800) 431-2609 fax: (800) 431-3129 ©2018 cad audio part no. 62267-48-03 jan2018 wx3000 wire...

  • Page 2

    13 individuals with cardiac pacemakers and other similar medical devices should consult with their physician before using any rf devices. Though the output level of this wireless system is below 50 milliwatts, the proximity of the transmitter to the implant device could pose a threat. As with any wi...

  • Page 3

    1 12 cadlive tm wx3000 introduction cadlive tm is designed to outperform your expectations and deliver exceptional performance. Engineered to compliment the new generation of exceptional sound systems - the cadlive series taps our equitek studio heritage along with our live sound know-how in creatin...

  • Page 4

    2 11 startup guide 1. Install new high quality alkaline batteries into transmitter, observing proper polarity. 2. Power up receiver by holding power button for one second. 3. Hold the set button for one second to unlock the receiver menu. 4. Hold the scan button for one second to activate the scanli...

  • Page 5

    3 specifications wx3000 frequency range ....................................................... Q band 470 - 489mhz n band 520 - 542mhz r band 580 - 600mhz frequency response .................................................................40hz - 15khz dynamic range ....................................

  • Page 6

    4 9 receiver rx3000 (front) 1. Power button. 2. Ir scanlink node. Use for linking transmitter and receiver. 3. Link button. Use to initiate tx-rx link. 4. Set button. Unlocks advanced features. 5. Scan button. Use to initiate environmental frequency analysis. 6. Up and down buttons. Use to adjust ad...

  • Page 7

    Receiver rx3000 (rear) 1. Dc power input jack. 12-18vdc, 300ma min, center positive. 2. Xlrm-type low-impedance balanced audio output. 3. 1/4" [6.35mm] high-level unbalanced ouput 4. Bnc 50 ohm antenna inputs. 8 1 2 3 4 4 simultaneous use 520 - 542mhz band n group channel frequency 1 1 521.325 1 2 5...

  • Page 8

    Ch group 1 group 2 group 3 group 4 group 5 1 521.325 524.475 521.000 521.500 520.600 2 522.325 525.075 521.775 523.125 521.775 3 523.725 526.150 523.025 524.450 522.025 4 525.575 528.150 523.700 527.275 522.650 5 526.675 530.500 532.050 528.250 523.750 6 533.025 533.500 534.200 528.900 529.575 7 534...