CAD Audio CADLive WX3000 Manual And Quick Start-up Manual - page 5
3
Specifications WX3000
Frequency Range ....................................................... Q Band 470 - 489MHz
N Band 520 - 542MHz
R Band 580 - 600MHz
Frequency Response .................................................................40Hz - 15kHz
Dynamic Range ...................................................................................>110dB
Transmitter Power................................................ Switchable 10, 30, 50mW
Battery Life .................................................................................Up to 15 Hrs
Dimensions ....................................................... 17" [43.2cm] x 12" [30.5cm]
x 4" [10.2cm]
Weight .......................................................................................... 5lbs [2.3kg]
Accessing Advanced Features (SET button)
All advanced features are accessed by holding the "SET" button for one
second to unlock the menu. Press the "SET" button to advance through
menu items. Menu items may be adjusted using arrow keys.
1.
Manually Select Frequencies
GR (frequency group)
CH (channel)
2. Receiver Squelch Level
SQL (used to reduce sensitivity to competing RF by
sacrificing operating distance)
3. Transmitter Power
TX SET RF (higher power increases operating distance,
lower power improves simultaneous usage)
4. Transmitter audio gain
TX SET GAIN (lower gain may be used as needed for
louder performers)
5. Receiver Output Volume
VOL (may be reduced if audio signal overloads mixer)
583.600
583.600
Handheld TX3000 Transmitter
1. CADLive D90 supercardioid
dynamic capsule.
2. Enclosed transmitting antenna.
3. IR node for Scan-Link
TM
4. Power/Mute button. Hold for power,
press for mute.
5. High-contrast display
a) Operating frequency
b) RF power indicator
c) Transmitter audio gain indicator
d) Mute indicator
e) Battery strength indicator
6. Battery compartment. Use only high quality
AA alkaline batteries. Observe polarity.
1
2
3
4
5
6
other side
a
b
c
d e
10