Calculated Industries 4087 User Manual - — 59
U
ser
'
s
G
Uide
— 59
Volume Answer Format
Standard
Fractional Mode
Standard
Mathematical Operation
Order of Operations Method
* Depressing the Reset button located above the
C
key will also
perform a Full Reset.
APPeNDIX b – prEFErENcE SETTINGS
The Machinist Calc Pro has Preference Settings that allow you
to customize or set desired unit formats and calculations. If you
replace your batteries or perform a Full Reset* (press
o
, hold
down
*
, and press
O
), your calculator will return to the following
settings (in addition to those listed on the previous page), with the
default setting for each preference listed first:
* Depressing the Reset button located above the
C
key will also per-
form a Full Reset.
PRefeReNCe
OPTIONS
1) Fractional
Resolution
– 1/64: displays fractional values to the near-
est 64th of an Inch.
– 1/2: displays fractional values to the nearest
half Inch.
– 1/4: displays fractional values to the nearest
quarter of an Inch.
– 1/8: displays fractional values to the nearest
8th of an Inch.
– 1/16: displays fractional values to the near-
est 16th of an Inch.
– 1/32: displays fractional values to the near-
est 32nd of an Inch.
(cont’d)
PRefeReNCe SeTTINGS
DefAULT VALUe