Calculated Industries 4087 User Manual - 60 — M
60 — M
achinist
c
alc™
P
ro
2) Functional
Result
Rounding
– 0.0000: calculation results using Machin-
ist functions are displayed to four decimal
places.
– 0.000: calculation results using Machinist
functions are displayed to three decimal
places.
– fLOAT: calculation results using Machinist
functions are always displayed to the maxi-
mum number of decimal places.
3) Default Unit
Format
– US: unitless values stored within Machinist
functions are automatically assigned the
corresponding default U.S. units of the
selected function.
– MeTRIC: unitless values stored within
the Machinist functions are automatically
assigned the corresponding default Metric
units of the selected function.
4) Area Answer
Format
– Standard: if units entered are the same
– e.g., Feet x Feet – area answers will
remain in this format (Square Feet), but if
units entered are different – e.g., Inches x
Feet – area answers will be displayed in
Square Feet.
– Square feet: area answers always
displayed in Square Feet, regardless of
unit entry – e.g., Inches x Inches = Square
Feet.
– Square Inches: area answers always
displayed in Square Inches, regardless
of unit entry – e.g., Feet x Feet = Square
Inches.
– Square Meters: area answers always
displayed in Square Meters, regardless
of unit entry – e.g., Feet x Feet = Square
Meters.
(cont’d)