Calculated Industries ElectriCalc Pro User Manual - 14 — E

14 — e

lectri

c

alc

®

 P

ro

♦ Second Press  

Displays the Full-Load Current percent 

multiplier value used to determine the Overload 

current protection size. Subsequent presses of 

 repeat the cycle.

Motor type (M-type) — Based on NEC Table 

430.52, this function selects the Motor Type used 

to define the percent factors for Breakers/Fuses.

Once set, the Motor Type remains fixed

until you change it or perform a Clear All 

( ).

♦ First Press  

Displays the current Motor Type. Note there is 

no Motor Type in Single-Phase mode.

♦ Second Press 

In Three-Phase mode only, subsequent 

presses of   will select and display the 

next Motor Type from this list: 

sQ-C non-b 

(Squirrel Cage, non-Design B), 

sQ-C b 

(Squirrel Cage, Design B), 

synC no code 

(Synchronous),

 WnD no code (Wound Rotor).

Dual element Fuse —

♦ First Press  

Calculates the minimum Amp rating for a  

Dual Element Fuse.

♦ Second Press  

Displays the Full-Load Current percent 

multiplier used to determine Fuse size.

Single element Fuse (SeFuse) —

♦ First Press 

Displays the minimum Amp rating based on 

Phase, Motor Type, and Amperage.

(cont’d)