Calculated Industries ElectriCalc Pro User Manual - — 7

U

ser

'

s

 G

Uide

 — 7

(cont’d)

milli- — Used with Watts, Amps, Volts, and  

Volt-Amps keys to identify “milli-” values.

amps — Enters or calculates Amps (using Volts 

and VA or Watts).

Volts — Enters or calculates Volts (using  

Amps, HPth, and VA or Watts). Default value  

is 240 Volts.

Volt-amps — Enters or calculates Volt-Amps 

(using Amps, Volts and Horsepower or Watts).

Watts — Enters or calculates Watts (using Amps, 

Volts, and VA or Horsepower).

Dc amps (idc) — Enters or calculates DC Amps 

(using DC Volts and Resistance).

Dc Volts (Vdc) — Enters or calculates DC Volts 

(using DC Amps and Resistance).

Dc resistance (r) — Calculates and displays  

DC Resistance in Ohms (using DC Volts and  

DC Amps).

power Factor (pF%) — Enters or calculates 

Power Factor percentage (based on Watts  

and VA). Default value is 100%. Entered or 

calculated Power Factors greater than 100%  

will result in an error.

theoretical Horsepower — Enters or calculates 

Theoretical Horsepower (based on Amps, VA, 

Watts, Efficiency%, PF%, and/or Volts). 1.0 HPth 

correlates to 746 Watts at 100% Efficiency.