Calculated Industries ElectriCalc Pro User Manual - — 17

U

ser

'

s

 G

Uide

 — 17

♦ Third Press 

Shows Fill Percentage for the calculated 

Conduit Size as determined by NEC  

Table 1, Chapter 9.

♦ Fourth Press 

Shows the Total Wire Area for all entered Wires.

♦ Fifth Press 

Shows Remaining Fill Area. This value may be 

negative if all Wires are the same size due to 

Note 7 in NEC Chapter 9, Table 1. 

conduit type (cond type) — Used to select 

the desired Conduit Type. Pressing these keys 

with a value between 1 and 12 will select the 

corresponding Conduit Type, as specified in the 

list below (i.e.,    selects the EMT 

Conduit). Continuous presses of   toggle 

through the available Conduit Types.

♦ First Press 

Displays the currently selected Conduit Type.

1) eMT

2) enT

3) fMC

4) IMC

5) lfnb

6) lfna

7) lfMC

8) RMC

9) P-80

10) P-40

11) P-a

12) P-eb