Caliber MCD 786 Owner's Manual - Wallpaper Setting
This unit allows user change the background
screen on the playback mode. This function is
called wallpaper change. User can select the
desire image on the below operation to set as
wallpaper.
Access to the System Menu and press IMAGE
Menu, the below TWO location are available for
images selection;
E - 20
Wallpaper Setting
My Gallery
My Image
There is total 10 factory default images for user
select use as wallpaper.
This is stores all those images capture by user
on this unit.
TIPS
TIPS
For details operation, please refer to
SYSTEM MENU_DISPLAY_MY GALLERY.
For details operation, please refer to
SYSTEM MENU_DISPLAY_MY IMAGE.
This units allows user during video or images
playback, user can capture images and store
them (up to 10 images) to set as wallpaper.
User also can capture an image from an
Auxiliary video device if connected.
1. Start playing the disc, USB stick , SD card or
auxiliary video device.
2. Hold press ‘ ’ capture buttons for more
than 3 seconds when the desired scene or
image appear on the TFT screen.
Setting the Background Screen
(Wallpaper)
How To Select The Image
Capturing Images for Wallpaper
How To Capturing Images
The captured images can be set as wallpaper
on the playback mode.
TIPS
For details setting of wallpaper, please refer to
SYSTEM MENU_MY IMAGE.
3. The confirmation display appears as
confirmed the image is stored in to MY
IMAGE.
TIPS
Those capture images will store in the
SYSTEM MENU_ DISPLAY _MY IMAGE.
For details please refer to SYSTEM MENU_
DISPLAY_MY IMAGE.
NOTE
Do not turn off the unit while storing the
image.
Stored image may differ from the original
aspect ratio due to compression or
elongation.
How To Setting The Captured
Images As Wallpaper