Caliber MCD 786 Owner's Manual - Bluetooth Operations
Bluetooth Operations
Auto Answer Mode
User can set this unit to automatically answer
all the incoming calls, once this function is set
to on, user do not need to press the button
to answer / accept any incoming call.
To Set The Incoming Ring Tone
Level
This unit allows the user to preset the most
suitable incoming call ringing volume level
from the car speakers. The factory default is set
at '20'. User can adjust the volume level in the
SYSTEM MENU of BLUETOOTH _Phone Vol.
Making An Redial Call
Press the button to access the dial interface
and then press to Redial the last number
dialed out on the unit.
To Activate The Privacy Talking Mode
(Incoming Call Transfer Mode)
During the talking mode, user can LONG press
the button to transfer the phone call from
the unit back to the mobile phone for privacy
reason. The below display will show on the TFT
for 3 seconds after the transfer mode is being
activated.
NOTE
After the “Transfer” button is pressed,
the mute of the present mode will be
released at the same time.
When making an outgoing call, it's not
possible to make the CALL TRANSFER,
if the call is not being answered yet. It's
only possible to Transfer the call to
Mobile phone after the call is being
answered.
Depending on different type of Mobile
Phone, the time need for activating the
CALL TRANSFER mode is different. Like
Nokia Mobile Phone usually takes 3-5
seconds after pressed the "TRANSFER”
button for phone call transfer back
or forth through Unit to mobile phone.
NOTE
Please refer to the SYSTEM MENU Operation
for more details of how to access into and
operates the SYSTEM MENU of BLUETOOTH
_Auto Answer.
NOTE
Please refer to SYSTEM MENU Operation for
more details of how to access into and
operates the SYSTEM MENU of BLUETOOTH
_Phone Vol.
E - 29