Caliber RDD 885BTI User Manual - Bluetooth Mode
EN - 13
Bluetooth mode
AUX
External peripheral devices with RCA audio and
video outputs can be connected with the unit.
To enter AUX IN mode, open the SOURCE
MENU and then touch [
Auxin].
Camera
This player is "camera ready". Before
accessing any camera features, you must
purchase and install a rear video camera.
Once the rear camera is connected and
operating properly, the CAMERA source
mode will become active. While the camera
is not installed, the CAMERA option appears
gray, indicating the function is not available.
The playing source will change to "CAMERA"
mode automatically when you reverse your
car.
SWC
Open the SOURCE MENU and then touch
[
SWC].
By the setting, you can use the button of the
steering wheel to control volume, select track
etc.
Setting below:
1.To connect your steering wheel control
device to the unit.
2. Enter the setting menu.
3. Touch the anyone key from "KEY 1" to
"KEY 7", and the opposite function key
turns bright.
For example:
1. Touch "KEY 1" function ;
2. And long-touch the function key from the
car,the screen display: "MUTE" / "VOL+"
/ "VOL-" / "SEEK DOWN" / "SEEK UP" /
"SOURCE" / "BAND" / "NULL"
3. Touch the anyone key that you want, and
the setting is success.
Touch the nether left corner of the screen to
exit, the setting of the other keys as the same
as the above.
Other modes
Switch phone call to the mobile
If you do not want your passenger to hear
your incoming call, you can switch the call to
the mobile.
1. During talking, touch [
Transfer Call].
The voice is transferred from the unit’s
loudspeaker to the mobile phone.
Adjust bluetooth settings
1. In Bluetooth menu,touch [
Options].
The option menu is displayed.
2. Touch on the selected option to change the
setting.
∙ [
Bluetooth]: To turn ON or OFF "Bluetooth"
function.
∙ [
Auto Connect]: To turn ON or OFF "Auto
Connect" function.
∙ [
Auto Answer]: To turn ON or OFF "Auto
Answer" function.
∙ [
Pairing Code]: To set paring code.
∙ [
DeviceName]: Device name is displayed.
Play music
If the connected Bluetooth device supports
Advanced Audio Distribution Profile(A2DP),
you can listen to the music stored on the
device through the unit. If the device also
supports Audio Video Remote Control
Profile(AVRCP), you can use the control on
the unit or its remote control to play music
stored on the device.
1. Pair the device with the unit.
2. Touch the upper left corner to return to
home menu.
3. Touch [
BT],the Bluetooth menu is
displayed.
4. Touch [
BT Audio], touch [ ] to start play
music via device.