Caliber RDD 885BTI User Manual - Adjust Volume
EN - 16
Adjust volume
To adjust volume, rotate the volume knob on
the host car audio.
Mute
When playback, press the VOLUME knob
on the panel or press the [
MUTE] key on the
remote control, the sound is cut off.
To resume sound, press the button again.
Select preset equalizer
You can select preset equalizer:
[User] [Rock] [Hip Hop] [Dance]
[Latin] [Rave] [Urban] [Acoustic]
1. Touch [
EQ] on the screen.
The current equalizer setting is displayed.
2. Touch [
+ ] or [ - ] to select an EQ.
3. Touch [
+ ] or [ - ] to adjust below settings:
∙ [
Bass] bass range: -14 to +14
∙ [
Mid] middle range: -14 to +14
∙ [
Treb] treble range: -14 to +14
∙ [
Mcf] low pass filter range: 60, 80, 100, 200
∙ [
Bcf] middle pass filter range: 0.5k, 1k,
1.5k, 2.5k
∙ [
Tcf] high pass filter rang: 10k, 12.5k,
15k, 17.5k
4. Touch [ ] on the screen to exit.
Adjust sound
Adjust rader/balance
You can also adjust the front and rear
speaker balance, the left and right speaker
balance,and subwoofer settings.
1. Touch [
EQ] on the screen.
2. Touch [
BAL-FAD].
Below options are displayed:
3. Touch [
+ ] or [ - ] to select subwoofer volume.
∙ [
Sub] subwoofer volume: -14 to +14.
4. Touch [ ], [ ] or [ ], [ ] to adjust
fader/balance value.
∙ [
Fade] fader range:
-16 to +16 (F=front range, R=rear range)
∙ [
Balance] balance range:
-16 to +16 (L=left range, R=rear range)
5. Touch [ ] on the screen to exit.