Califone PowerPro PA919PS Owner's Manual - Pa919Ps Specifications
19
Acoustic Speaker Compliment
Woofer
10” Diameter, 40 Oz. Magnet, 2” Dia. Voice Coil, 6 Ohm
Tweeter
Compression Horn Driver, 12 Oz. Magnet, 1” Voice Coil, 8 Ohm
Frequency Response
45Hz to 18KHz
Amplifier
90 Watts RMS @ 5% THD (AC)
Sound Pressure Level
94 dB, 1 Watt @ 1 Meter
Power Sources
100-240 volt AC switchmode power supply and 12 volt 7 AH
maintenance-free lead acid batteries (2)
Wireless System
Receiver: One 16-channel selectable UHF diversity wireless receiver 902 ~ 928 MHz (16 channels)
Antennas is hidden internally.
Microphone Transmitters
Handheld wireless microphone or beltpack transmitters optional.
Beltpack transmitter used with choice of hands-free headset, collar or lapel microphones.
Audio Line
Line level XLR jacks (2) providing for attaching PA919-SP speakers via cable. Features volume control for remote speaker(s).
Mixer Panel
Mixer panel accepts one wired XLR microphone. Voice music switch adds emphasis in the voice range for longer range projection.
Line-In via dual RCA jacks with volume control. Line-Out via dual RCA jacks. Separate Bass and Treble tone controls. Voice priority
switch activates “ducking circuit” which overrides music programs when microphone is used. Speaker mute switch mutes the main
speaker plus all other speakers connected. Speaker out. Both switched and unswitched 1/4” phone jacks for connecting speakers.
Dimensions
26 H x 12” W x 10” D
Weight
52 lbs.
Compliance
FCC, CE, C-UL
Non-powered Companion Speaker PA919-SP