CallingSYS ZJ-49PC User Manual - Operation Instruction
Operation Instruction
1
. Self test when power on
When the receiver host is power on, it starts initialization program. The 4 corner LED indicators will
flicker and display will show the digits from 000 to 999 along with the prompt music.
2
. Function settings
At first time using, please do the settings like below. After all the settings are finished, please power
off the host and reset.
Long press the “SET” button for 2 sec to enter the first class settings menu. Then press
“UP/DOWN” button to select the menu from Cd1 to Cd9. And press “SET” button to enter submenu.
(1) "Cd1": Prompt music
Press
"SET" button to enter "Cd1" submenu. The display will show "00", then press "UP/DOWN"
to
select sound prompt mode.
00
: number speaker mode
01: music prompt mode
02: dingdong prompt mode
Press “BACK” button to previous menu or quit to standby status.
(2) "Cd2": Volume
Press
"SET" button to enter "Cd2" submenu. The display will show "15", then press "UP/DOWN"
to
adjust the volume from “01" to “15" different level. “00" means mute.
Press “BACK” button to previous menu or quit to standby status.
(3) "Cd3": Display cycle time setting
Press
"SET" button to enter "Cd3" submenu. The display will show "000", then press
"UP/DOWN" to adjust the display cycle time from “001" to “180" seconds. “000" means no cycle.
This function is that when there are several calling records, they will cycle display one by
one automatically.
Press “BACK” button to previous menu or quit to standby status.
(4) "Cd4": Delete time setting
Press
"SET" button to enter "Cd4" submenu. The display will show "040", then press
"UP/DOWN" to adjust the auto delete time from “001" to “240" seconds. “000" means no auto
delete function.
This function is that when there is a calling record on the screen, after some time, the record will be
deleted automatically.
Press “BACK” button to previous menu or quit to standby status.
(5) "Cd5": Timeout prompt time setting
Press
"SET" button to enter "Cd5" submenu. The display will show "000", then press
"UP/DOWN" to just the timeout prompt time from “001" to “180" seconds. “000" means no timeout
prompt function.
When the time is set, in the time, the service person should go to provide service, or not, the
display screen will flicker to prompt to do it.
Press “BACK” button to previous menu or quit to standby status.
(6) "Cd6": key switch mode setting
Press
"SET" button to enter "Cd6" submenu. The display will show "5", then press "UP/DOWN"
to just the key mode.
① “2" means 2-key mode, which is suitable for 1/2-button calling transmitters.
② “5" means 4-key mode, which is suitable for 1/3/4/5/6-button calling transmitters.
(7) "Cd7": Number registration setting (Transmitter paring or deleting)
5